• JoeKis@lemmy.world
    29·
    2 days ago

    😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮

  • Jessica@discuss.tchncs.de
    45·
    2 days ago

    Everyone’s laughing at the fire hazard, but I would unironically buy this if it was a power strip and not a surge protector because I’m already basically doing this with four separate power strips into a single uninterruptible power supply for all of my retro video game consoles, modem, router, roku, and my television. The trick is basically nothing is ever on at any given time so right now the current output is only 36 watts.

      • rmuk@feddit.ukEnglish
        4·
        1 day ago

        Okay, I’m actually onboard with those things. It’s usually a cable with a single wall plug on one end and four C13 plugs at the other. So you could plug in two monitors, a desktop PC and a printer, say, with just one socket. They’re a lot neater than having a whole power strip and four cables. I’ve also seen ones that split one C14 into four C13s but I’m not as sure how I feel about those.

        • ysjet@lemmy.worldEnglish
          1·
          20 hours ago

          SCART is a european (french, technically) audio/video connector and standard. It’s sort of like composite/component video in the US, except it’s far better, so retro game enthusiasts love it.

      • Jessica@discuss.tchncs.de
        6·
        2 days ago

        Hah! It’s a rats nest that I basically dumped back there the last time I moved and the labels are from a long time ago before I had most of the stuff. It’s not like you get a new retro console every day so I’m almost never back there. That’s kind of the whole point. I plug everything in one time and then I don’t touch it until I move.

    • toynbee@lemmy.world
      8·
      2 days ago

      I have the 22 port, actual, real version of this. It’s leveled up my cable organization game.

      • Jessica@discuss.tchncs.de
        7·
        2 days ago

        Unfortunately these high capacity power strips always have surge protector functionality in them, and it’s a very bad idea to daisy-chain surge protectors because they can interrupt each other trying to stop the current and all of your stuff will get fried.

        Power strips are fine as long as you aren’t exceeding the maximum load, but they never come with as many plugs so that’s how I ended up with four different power strips and some 1 foot extension cords for all those damn wall warts.

        All of that is going into the handful of battery backup plugs on the uninterruptible power supply so if I’m ever playing a retro game and the power goes out, I don’t lose my progress! You know how evil games used to be; half the time you can’t even save the damn game lol

        • toynbee@lemmy.world
          3·
          2 days ago

          I haven’t done an analysis of my power strip / surge protector layout, but my gaming system is just plugged into a UPS with six ports.

          The 22 port one is for my server closet. I’d love to show you, but for some reason my client won’t allow me to upload photos.

  • Darkassassin07@lemmy.caEnglish
    43·
    3 days ago

    Ah yes, for my 66… 13w? Devices.

    I guess a bunch of LED strings and maybe a phone charger (low-speed 5v 3a only).

    Edit: also, what is 12-14 usb charging ports? You’re not sure how many there are? Does it vary from package to package?

    • jqubed@lemmy.world
      38·
      2 days ago

      The 12-14 USB ports is my favorite part, like they couldn’t be bothered to count, or it varies.

      • Darkassassin07@lemmy.caEnglish
        14·
        2 days ago

        I love how the cord is only 6" long, so you’ve either got to bolt this monstrosity to the wall immediately beside the outlet, or plug it into another extension…

        • filcuk@lemmy.zip
          1·
          2 days ago

          I’d expect this to be used in a factory for product testing, where they probably have sockets on the bench

        • Coldus12@reddthat.com
          1·
          2 days ago

          I might not understand 😅 Or I may have miscounted something. But in the middle there are 5 sockets in a row, there are 10 rows, on each side there are 8 sockets. That does seem to add up to 66 to me. What am I missing?

          • pixeltree
            1·
            2 days ago

            Lmao I had apparently counted 11 rows instead of 10. Whoops

      • jaybone@lemmy.world
        2·
        2 days ago

        I’m guessing it varies based on whatever components they had available when they ran that batch on the assembly line?

    • rumba@lemmy.zipEnglish
      18·
      2 days ago

      I own one. They’re fantastic; you just have to realize what you have. You can’t plug in a computer, three laptops, two monitors, and a space heater.

      Most of the stuff I’m plugging in is a few watts.

      • Zwiebel@feddit.orgEnglish
        9·
        2 days ago

        Space heater 1500W, PC 500W, 3 laptops 360W, 2 monitors 100W = 2460W

        With our superior european 230V outlets you can in fact easily plug all that into one power bar :D

        • rumba@lemmy.zipEnglish
          2·
          2 days ago

          We have 220V here too, just not a lot of receptacles or options on power strips :)

          I have a 220v 50A in my garage, clothes dryer and Oven.

            • rumba@lemmy.zipEnglish
              2·
              2 days ago

              Yup. 50A for level 3 chargers and welders. Oven might be 30, but i know the garage is a 50a circuit.

          • InFerNo@lemmy.ml
            1·
            2 days ago

            I don’t know enough about electricity. Electrician told me I have 3 phase 400v and it wasn’t common. Not sure what that means or what benefit it gives me.

            • absGeekNZ@lemmy.nzEnglish
              3·
              2 days ago

              It just means that you can run industrial gear; maybe was owned by a keen potter previously. Big kilns need 3 phase power. No it isn’t common for domestic, but I have a few friends with big shed that have 3 phase power for machining tools.

              Depending on what capacity the supply has; e.g. if you have a smallish 80A supply you can run a a good sized CNC mill in you shed.

            • rumba@lemmy.zipEnglish
              2·
              2 days ago

              Three phase is useful for industrial motors or if you need more than 200A service. If I wanted to add another car charger in my garage and use them at the same time, they would have had to bring in another phase.

      • zalgotext@sh.itjust.works
        3·
        2 days ago

        You can’t plug in a computer, three laptops, two monitors, and a space heater.

        👀

        What about a desktop, two laptops, speakers, a printer, four monitors, and some networking equipment? Asking for… Myself. I’m asking for myself.

        • rumba@lemmy.zipEnglish
          2·
          2 days ago

          The box says 15 amps. I think 15 might be pushing it at a bit.

          Just start adding up all the input amps and see what it comes to. If it’s not Enterprise Network gere and a laser printer you have a solid chance.

    • Empricorn@feddit.nlEnglish
      1·
      2 days ago

      I don’t know… Tripp Lite (no affiliation) surge strips insure equipment you plug into them. For life…

      • dual_sport_dork 🐧🗡️@lemmy.world
        3·
        2 days ago

        Yeah, they all say that. And then when you try to claim it they have a million clauses in their fine print that allows them to weasel out of it.

        Did you register to your equipment with them when you plugged it in? Do you still have your receipts? Did you use an extension cord anywhere in your power path at all? Did you know they only provide “current pro rata market value” for everything, which means their math makes all your computers worthless after they’re a week old? Can you prove it was actually a power surge and not some other occurrence that took out your device? Etc., etc., etc.

        Never trust your equipment to one of those guarantees.