Try to avoid duplicates, keep it interesting.

    • SomeGuy69@lemmy.world
      link
      fedilink
      arrow-up
      5
      ·
      10 months ago

      I wish they’d fix and release the nightly. It so cool looking but there are quite some bugs still. Like performance, playlists, options not working and somehow it can’t play videos from my network, while release version can all of this…

      • ediculous@feddit.nl
        link
        fedilink
        arrow-up
        3
        ·
        10 months ago

        Oh wow, they have a version that doesn’t look like it was made for XP? Sucks that it’s buggy.

      • lars@lemmy.sdf.org
        link
        fedilink
        arrow-up
        2
        ·
        10 months ago

        I too am a bleeding-edge addict. I would prefer worse acting software so long as it is beta (or better, alpha (or better, nightly)).

        So I wasn’t even aware VLC had solved these issues I’m still delighted to live with.

      • AnActOfCreation@programming.dev
        link
        fedilink
        arrow-up
        1
        ·
        10 months ago

        I wish they’d fix and release the nightly. It so cool looking

        Are there any screenshots of the nightly? I’m curious if it looks good enough to switch back.

    • Aurenkin@sh.itjust.works
      link
      fedilink
      arrow-up
      7
      ·
      10 months ago

      Logseq is fantastic. I use it every day at work now for both knowledge and also lightweight task management.

    • Dizzy Devil Ducky@lemm.ee
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      Maybe it’s just a me problem, but I always have had troubles getting KDE Connect connecting my phone to other devices than my desktop. My phone and laptop could both be connected to the same wifi and be within inches of each other but refuse to acknowledge their existence. But I have my phone on the other side of the world and I swear it’ll be able to connect to my desktop with no problem.

      KDE Connect is a pretty good program, but I can’t recommend it because of the troubles I always have.

      • HerrVincling@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        10 months ago

        I had this too until I discovered my router doesn’t allow communication between devices connected to the 5GHz band. 2.4GHz works fine so now I have everything connected to that

        • Dizzy Devil Ducky@lemm.ee
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          10 months ago

          I’ll definitely have to check that out later to see if that fixes the problem.

          Thanks for the info.

      • linearchaos@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        It’s ability to connect your phone to your computer is honestly awful. It would be better if they just openly popped up a window and told you to pick the IP, but they even have to hide that and not support it on every platform.

        My laptop’s plugged in my phone’s on a Wi-Fi network they’re on different VLANs. They could let me search for it by DNS name. They could let me just use a couple of static IPs so when I go from home to work it could find it in either place.

        If you have any equipment beyond a crappy one band ap, it’s just going to fight you every time you want to use it.

        I love the software, I love the plugins It’s just too damn bad that You have to remember to screw with it every time you think you might want to use it.

  • Daeraxa@lemmy.ml
    link
    fedilink
    arrow-up
    45
    ·
    10 months ago

    Somewhat self promoting for the first two of these items as I’m directly involved. Leaving out the more obvious ones (Linux distro etc.) as they will have been mentioned. I’ll stick to some of the less known things I use.

    • AusatKeyboardPremi@lemmy.world
      link
      fedilink
      arrow-up
      8
      ·
      10 months ago

      Thanks for highlighting Pulsar.

      I always found Atom clunky, but it was instrumental in changing how editors were made, perceived, and used.

      It did not deserve the death/abandonment it got.

      • init@lemmy.ml
        link
        fedilink
        arrow-up
        10
        ·
        10 months ago

        Atom was my go-to editor while in school–hard to believe it’s been long enough to be abandoned already. I’m going to have to check Pulsar out.

    • What's Delicious?@lemmy.ml
      link
      fedilink
      English
      arrow-up
      3
      ·
      10 months ago

      Dust has completely replaced du in my every day work. Other tools also written in Rust I make use of include Bat for an upgraded experience from cat, Tokei for quickly counting and recognising codes, and several other security tools like RustScan.

      I learn about Joplin today. Thank you for sharing your list.

  • u/lukmly013 💾 (lemmy.sdf.org)@lemmy.sdf.org
    link
    fedilink
    English
    arrow-up
    35
    ·
    10 months ago
    • Termux
      Holy hell. So much it can do. Right now I am using it to transcode MPEG2 videos to AV1. With CRF 25, Preset 5, with a 480p30 video I get 5fps in Termux on my older Snapdragon 860. Meanwhile my laptop’s Ryzen 3 3200U does 2fps.
      You can run different server applications. Some are supported natively (e.g.: Tinyproxy, Privoxy, Squid HTTP proxy, apache2, nginx, navidrome, OpenSSH, TigerVNC, rsync, xorg-server, xwayland, xrdp,…) and some can run in proot (e.g.: Jellyfin, NextCloud). If you already have some web server and want it public, there’s cloudflared too, so you can access it via Cloudflare tunnel.

    • RTL-SDR driver
      Allows connecting RTL-SDR on Android and starting RTL-TCP server.

    • SDR++
      The best general-purpose SDR app available on Android, GNU+Linux, Windows and MacOS.

    • KDE Connect
      Nicely connects phone with a computer. Data transfers, remote control, finding your phone, synchronizing notifications.

    • LibreTorrent
      Great client for Android.

    There’s more, but those I don’t use daily, or have already been mentioned.

    • damnthefilibuster@lemmy.world
      link
      fedilink
      arrow-up
      6
      ·
      10 months ago

      For iOS folks, a-shell and iSH can do what termux is doing on Android. Ffmpeg, most userland Linux things.

      Both are open source.

    • Cl1nk@sh.itjust.works
      link
      fedilink
      arrow-up
      3
      ·
      10 months ago

      Can you link to some tutorials to learn to do what you describe here? Specially termux all I found was a Linux terminal emulator for android

    • kratoz29@lemm.ee
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      I have many doubts, I’ll try to quote each.

      I get 5fps in Termux on my older Snapdragon 860. Meanwhile my laptop’s Ryzen 3 3200U does 2fps.

      Is this good or bad for Termux? I’m kinda inclined to think it is good (I have a SD 865 so I’m extra curious).

      (e.g.: Jellyfin, NextCloud).

      I have read about the self hosting possibilities before for sure and while I will always find it amazing I would die inside if I had to use my phone (and specifically Termux, since I think text selection, copy/paste and overall typing is bad on it), that without proper hardware ofc (like external mouse and keyboard… Or a UI like DeX) so I gotta ask, do you use any of those services? If yes do you have some of those tools I just mentioned?

      RTL-SDR driver
      Allows connecting RTL-SDR on Android and starting RTL-TCP server.

      I kinda want to know what you meant here.

      SDR++
      The best general-purpose SDR app available on Android, GNU+Linux, Windows and MacOS.

      I only know SDR from the video format scene, and I know you want HDR or better.

      LibreTorrent
      Great client for Android.

      This is cool, and I didn’t know about it, but surely there are better options to use torrent on Android?

      There’s more, but those I don’t use daily, or have already been mentioned.

      I kinda want to know what more, because honestly, if Termux was paid you would almost sell it to me 🤣

      • jawa21@startrek.website
        link
        fedilink
        arrow-up
        3
        ·
        10 months ago

        RTL-SDR is basically a way of using a digital device as a broadband radio. That is an oversimplification, but that is the idea. There are cheap USB devices out there that will turn a PC into a ham radio receiver (among a really wide range of other bands like weather satellites). I have no idea how they are doing it with Android, however. Maybe using the phone’s antenna.

            • Zoop@beehaw.org
              link
              fedilink
              arrow-up
              2
              ·
              10 months ago

              I appreciate that! & I totally understand. Unfortunately, they really cornered the market for quite a few niche little hobbies’ communities that used to be more filled out with independent and individual forums and sites before they took over. Such is life, eh?

            • Zoop@beehaw.org
              link
              fedilink
              arrow-up
              2
              ·
              10 months ago

              Sweeeet! Thank you so much! That was super fun to play with and I’m looking forward to trying it out again another day :)

      • u/lukmly013 💾 (lemmy.sdf.org)@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        3
        ·
        edit-2
        10 months ago

        I am sorry for not responding quicker, but I was at school and I am also tired, so don’t expect a high quality reply.

        Is this good or bad for Termux? I’m kinda inclined to think it is good (I have a SD 865 so I’m extra curious).

        I have no idea. My phone and laptop are the 2 only pieces of hardware to test with. I also wanted to try OnWorks, but getting the file to that seems fairly painful. Downloading that particular video from archive.org is too slow, trying to get it from FileNow where I uploaded it would hang every 14MB and fail. The only working “solution” was running nginx webserver with that file there in Termux and creating Cloudflare QuickTunnel, but my mobile data is slow and we don’t have internet at home. So I just didn’t get to try it.

        I have read about the self hosting possibilities before for sure and while I will always find it amazing I would die inside if I had to use my phone (and specifically Termux, since I think text selection, copy/paste and overall typing is bad on it), that without proper hardware ofc (like external mouse and keyboard… Or a UI like DeX) so I gotta ask, do you use any of those services? If yes do you have some of those tools I just mentioned?

        I have only tried Jellyfin briefly and want to try running NextCloud when I’ll have time for it, as that seems more painful looking at the guides on internet. Jellyfin just didn’t fit my use case, so I replaced it for nginx with fancyindex module and Material theme.
        I don’t have a problem using the touchscreen. Copy-paste works pretty well, like with any other text. Just a little tip: Home puts you on start of the line and End at its end.
        But anyway, I do often use a hardware keyboard. Sort of. I don’t attach it to my phone, instead I SSH into my phone from some computer, be it my laptop or school PC. For GUI I can also use VNC server. Keep in mind VNC isn’t encrypted by default. There’s VNC-TLS and X509, but I have no idea how to deal with certificates, which allows anyone to do MITM attack on me. Simplest solution is running it over SSH tunnel, at which point I can use unencrypted VNC which is compatible with more programs.

        I kinda want to know what you meant here.

        RTL-SDR is one of the SDRs (Software Defined Radio) that I have. I also have a clone of RSP1. I don’t know where I would start on that. It allows a lot. But after all, you can just search “What to do with SDR” yourself, and find countless answers.
        My most favorite use is receiving satellite signals. So far only in the 137MHz band because I don’t have a satellite dish. In this case V-Dipole is enough. Since I have the RTL-SDR Blog’s extendable dipole, I can fit a satellite imagery receiving station into my pocket.
        Check !amateursatellites@lemmy.world
        Example image that I received over APT (it’s analog signal, old-school tech):

        I used noaa-apt, again in Termux, to decode it.
        Or perhaps this catches your interest: Cracking GSM phone calls and SMS with SDR (YouTube playlist) which is obviously illegal. It also only works for the weak A5/1 encryption and only with GSM (2G). While newer standards are sure safer, don’t trust anything that’s not E2EE at all anyway.

        I only know SDR from the video format scene, and I know you want HDR or better.

        Yep, SDR = Software Defined Radio.

        This is cool, and I didn’t know about it, but surely there are better options to use torrent on Android?

        I am not sure. LibreTorrent works well for me.

        I kinda want to know what more, because honestly, if Termux was paid you would almost sell it to me 🤣

        I meant other FOSS apps, not stuff in Termux. But it’s like a locked down GNU+Linux machine, so it just does a lot of Linux things. Thanks to proot-distro or Andronix scripts you can even have Ubuntu, Arch Linux or other distros on it. That’s what you need for Jellyfin for example. Just keep in mind that your phone is most likely aarch64 and Termux doesn’t emulate other architectures. Though it can run QEMU 😏 (but if you tried Limbo PC Emulator x86 you understand how useless it is with anything better than Windows 98). I did get that to run Windows 7, yes, but even just opening a file browser took a few minutes.
        Anyway, cursed screenshot as a bonus:

        Even though it CAN be done doesn’t mean you SHOULD. I already cooked 1 Poco X3 Pro motherboard to its death.

  • Helix 🧬@feddit.de
    link
    fedilink
    English
    arrow-up
    30
    ·
    edit-2
    10 months ago
    • Fluent Reader – to very quickly get a lot of news which I need for work
    • Beeper – for the 100 chat apps I need to use to stay in contact with my friends who don’t use Matrix
    • Nheko – for the based friends who have [matrix] accounts and chats with industry professionals in my field
    • FluffyChat – mobile device [matrix] client
    • Logseq – as second brain, works better for me than Obsidian
    • Jameica – for online banking and accounting
    • K-9 Mail / Thunderbird – mail client
    • DecSync CC – for synchronising contacts with multiple devices through Syncthing
    • ActivityWatch – to track everything I do in case I forget to book time in my corporate time sheet, or if I want to know how long I played games in contrast to programming
    • KDE Plasma – best desktop environment boosting my productivity to about 140% of what I could do with Windows 10
    • Qalculate! – very fast and easy to use scientific calculator, can also do conversions like “1h50min → min” or “15€ → $”
    • Aegis – TOTP generator for mobile
    • VLC – plays everything you throw at it
    • mpv – plays everything you throw at it, if you installed the right codecs, and also does fancy ML-based GPU upscaling in my case
    • KeePassXC, KeePassDX – password managers integrated on Desktop, Laptop, Tablet and Phone
    • Syncthing – to automatically and seamlessly sync all my devices (Laptop, Desktop, Tablet, Phone, second Laptop, Servers, …)
    • Firefox Developer Edition, Librewolf – browsing the web without Chromium
    • Chromium – for PWAs like Teams, Outlook, Discord
  • Count Regal Inkwell@pawb.social
    link
    fedilink
    arrow-up
    26
    ·
    10 months ago

    Well, there’s the usual: GIMP. Lemmy & Firefish instances. Linux OS. Syncthing. Firefox. Inkscape.

    qOwnNotes is cool and I don’t hear much about it.

    Also shout out to libre games. GZDoom and UnCiv mostly. But MOSTLY GZDoom. GZDoom is a platform, not a game.