I know there’s been a few posts about this before, but it’s been a month since the last one and it’s still ongoing. It doesn’t seem that any of the LW admins responded to Zag’s post on their help community, and the last response from lodion/Nath I’m aware of was from 4 months ago when there were outright federation failures as opposed to just lengthy delays.

@Nothing4You@programming.dev posted a comment on the post from last month about the delays stating that it’s an issue on our end as our server isn’t keeping up. I’m not sure whether this is the case or not, and I’m not sure how to interpret the Grafana dashboard they linked to, but as it’s a new reply on an old post, I wanted to note it.

Current federation delays seem to be around 7 days. It doesn’t seem to be affecting posts themselves on Lemmy.world communities, but does affect all replies to them (even from users on other instances), and all upvotes on the posts. [Edit: on further investigation, this isn’t the case. The current delays are at least 13 days, and this does actually affect posts too]

I don’t want to sound too pushy, since the LW admins and Lodion/Nath are all volunteers, but I was hoping we might be able to get an update on what the cause is, and if it’s an issue in Lemmy itself, if anybody’s opened an issue on GitHub and the developers are aware.

(NB: I don’t interact that much with LW, so all of my testing has been on the Boost for Lemmy community.)

  • AdaA
    link
    fedilink
    arrow-up
    9
    ·
    7 months ago

    The next milestone release of lemmy is scheduled to include parallel processing per instance for incoming activities, which should resolve the issue.

    I don’t know what the timeframe on that is though

  • Nothing4You@programming.dev
    link
    fedilink
    arrow-up
    5
    ·
    7 months ago

    stating that it’s an issue on our end as our server isn’t keeping up

    this isn’t exactly an issue in your end, unless you consider hosting the server in Australia as your issue. the problem is the latency across the world and lemmy not sending multiple activities simultaneously. there is nothing LW can do about this. as unfortunate as it is, the “best” solution at the time would be moving the server to Europe.

    there are still some options besides moving the server entirely though. if you can get the activities to lemmy without as many delays am experience similar to being hosted in Europe can be achieved.

    • Zagorath@aussie.zone
      link
      fedilink
      English
      arrow-up
      5
      ·
      7 months ago

      the “best” solution at the time would be moving the server to Europe

      I believe the NZ instance basically set up a proxy right next to the LW server, which catches the ActivityPub messages and forwards them in batches to another proxy located in NZ, which translates back into a Lemmy-legal synchronous format. Rather a convoluted process, but it seems to work:

        • Lodion 🇦🇺@aussie.zoneM
          link
          fedilink
          arrow-up
          5
          ·
          7 months ago

          Is that software available for others to use? I’ve been busy lately, but Nath messaged me about this… I was traveling and forgot about it by the time I returned.

          I’m open to the idea of setting up an EU VPS to proxy LW traffic temporarily. But the best fix is of course for Lemmy to operate in a way that doesn’t cause this.

          • Nothing4You@programming.dev
            link
            fedilink
            English
            arrow-up
            4
            ·
            7 months ago

            it’s open source: https://github.com/Nothing4You/activitypub-federation-queue-batcher

            I strongly recommend fully understanding how it works, which failure scenarios there are and how to recover from them before deploying it in production though. not all of this is currently documented, a lot of it has just been in matrix discussions.

            I also have a script to prefetch posts and comments from remote communities before they’d get through via federation, which would make them appear without votes at least, and slightly improve processing speed while they’re coming in through regular federation. this also doesn’t require any additional privileges or being in a position to intercept traffic. it is however also not enough to catch up and stay caught up.
            this script is not open source currently. while it’s fairly simple and straightforward, i just didn’t bother cleaning it up for publishing, as it’s currently still partially integrated in an unrelated tool.
            I previously tried offering to deploy this on matrix but one of my attempts to open a conversation was rejected and the other one never got accepted.

    • Baku@aussie.zoneOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      7 months ago

      Please ELI5: How does latency alone (319ms from Helsinki to Sydney, apparently) cause week long response times?

      • Nothing4You@programming.dev
        link
        fedilink
        English
        arrow-up
        4
        ·
        7 months ago

        lemmy’s current federation implementation works with a sending queue, so it stores a list of activities to be sent in its database. there is a worker running for each linked instance checking if an activity should be sent to that instance, and if it should, then send it. due to how this is currently implemented, this is always only sending a single activity at a time, waiting for this activity to be successfully sent (or rejected), then sending the next one.

        an activity is any federation message when an instance informs another instance about something happening. this includes posts, comments, votes, reports, private messages, moderation actions, and a few others.

        let’s assume an activity is generated on lemmy.world every second. now every second this worker will send this activity from helsinki to sydney and wait for the response, then wait for the next activity to be available. to simplify things, i’ll skip processing time in this example and just work with raw latency, based on the number you provided. now lemmy.world has to send an activity to sydney. this takes approximately 160ms. aussie.zone immediately responds, which takes 160ms for the response to get back to helsinki. in sum this means the entire process took 320ms. as long as only one activity is generated per second, this is easy to keep up with. still assuming there is no other time needed for any processing, this means about 3.125 activities can be transmitted from lemmy.world to aussie.zone on average.

        the real activity generation rate on lemmy.world is quite a bit higher than 3.125 activities per second, and in reality there are also other things that take up some time during this process. over the last 7 days, lemmy.world had an average activity generation rate of about 5.45 activities per second. it is important to note here that not all activities generated on an instance will be sent to all other linked instance, so this isn’t a reliable number of how many activities are actually supposed to be sent to aussie.zone every second, rather an upper limit. for example, for content in a community, lemmy will only send these activities to other instances that have at least one subscriber on the remote instance. although only a fraction of the activities, private messages are another example of an activity that is only sent to a single linked instance.

        to answer the original question: the week of delay is simply built up over time, as the amount of lag just keeps growing.

        additionally, lemmy also discards its queued activities that are older than a week once a week, so if you go over 7 days of lag for too long you will start completely missing activities that were over the limit. as previously explained, this can be any kind of federated content. it can be posts, comments, votes, which are usually not that important, but it can also affect private messages, which are then just lost without the sender ever knowing.

  • Baku@aussie.zoneOP
    link
    fedilink
    English
    arrow-up
    5
    ·
    7 months ago

    Actually looking into it further, it seems to be even worse than I thought. Looking at !support@lemmy.world, the most recent post shows as being from 13 days ago

    The actual most recent post (as of writing) is from 12 hours ago

    • Baku@aussie.zoneOP
      link
      fedilink
      English
      arrow-up
      3
      ·
      7 months ago

      Thanks dhmo. One request though: would it be possible to unpin the (now closed) moderator applications post? I was actually going to message you about that earlier (but put it into the “ah I’ll get around to it eventually pile”) as all the pinned posts make it harder to see posts on my mobile app

      • ⸻ Ban DHMO 🇦🇺 ⸻@aussie.zone
        link
        fedilink
        English
        arrow-up
        2
        ·
        7 months ago

        Thanks, I’ve done that now, kind of thought it might be a bit annoying. I’m in two minds over unpinning the tax scam one, on the one hand it’s basically as old as the community and on the other it’s somewhat useful info

        • Baku@aussie.zoneOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          7 months ago

          I reckon you should keep it until someone writes a new one. I might write a more general one after tax time

          Personally I’m not sure it’s that useful, my assumption is that given the more technical nature of most lemmings, it’s probably pointless. But that’s probably a bad way of thinking, since anybody can (and have!) been scammed before, and even though some people are harder to scam, everybody has their weaknesses

          • ⸻ Ban DHMO 🇦🇺 ⸻@aussie.zone
            link
            fedilink
            English
            arrow-up
            2
            ·
            7 months ago

            Yeah that would be good. Perhaps we might replace it with a more general thread about scams and encourage people to share scams they’ve come across, maybe refresh it every year. That way we can all be a bit more aware of specific examples of ongoing scams - even if the average Lemmy user might not fall for them it’s likely they know someone who will. The only fear I guess with the megathread format is it will disappear as it becomes inactive (in people’s feeds at least), so maybe a separate community is in order

  • No1@aussie.zone
    link
    fedilink
    arrow-up
    2
    ·
    edit-2
    7 months ago

    A side question…

    What’s gonna happen when this is finally fixed?

    Will there be a flood of thousands of posts all at the same time/short period as we ‘catch up’?

    • Baku@aussie.zoneOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      7 months ago

      I don’t think so? I’m guessing Lemmy requires a restart after an update, and I don’t think it resends activities after a restart. I think it’ll all just be lost into the ether