I have been daily driving a dual booted laptop for the past two years. After a year of distro hopping I settled with fedora + kde and never looked back. I really liked the auto nvidia driver config and it made everything so pleasant to work. Since the last 8 or 9 months I decided to do gaming using bottles and proton ge. I cannot afford to buy games and bottles is a God send at that. Now I realized that I had not logged into my windows partition in over 6 months. So I logged in to check and it told me it needs to download 8 gigs of updates. That sent me into rage and so clean installed everything to be fedora. I have 250 gb of storage locked in limbo because of windows( I have a 512 gb ssd so it was a lot) and today after everything was setup, the os took only around 20gb minus the games. Never felt happier.

  • EveryMuffinIsNowEncrypted
    1·
    10 months ago
    1. I built my own NAS (OpenSUSE Leap running BTRFS), so I know nothing about Emby. I use Samba for network shares (wife uses Windows), DLNA to stream to my TV, and SSH to manage everything from my other Linux systems.

    That’s really incredible! Yeah, I just bought a Qnap TS-something and used the software made for it. It was my very first NAS and I didn’t wanna go too crazy since I was still a beginner at everything NAS-wise (I still am, but not as much).

    And Emby is just basically a personally streaming plaform—you install Emby through the Qnap operating system installed on your NAS, which then acts as a front-end for streaming the files stored in the attached hard drives as well as organizing said files with images, metadata & nfo files, etc. Think of it like a personal Netflix. Similar options are Jellyfin and Plex.

    1. I just ended up buying everything through Steam. I wish GOG Galaxy worked on Linux and had proper support for Windows games (e.g. do something like Steam does with Proton). If Steam is good enough, you can add Lutris/Heroic/etc games to Steam. I’ll have to poke around a bunch and find a good workflow for Windows installers (I just used WINE directly in the past, but that experience kind of sucks)

    I have some games on Steam, but by and large I buy my games on GOG since I prefer to own my games. (No insult to you; I’m just saying how I do things.)

    1. I’ve only used it with a manual WireGuard configuration (goal was to configure it on my router). I’ll try playing with their GUI and CLI though, maybe I can figure out what’s going on. Best guess is that it’s trying to start up on boot, but your Wi-Fi connects on login, so ProtonVPN fails and doesn’t retry.

    I’m kind of thinking the same thing, though to be honest I’m still very much a Linux newb. As a general principle, I try not to fuck with things I’m unfamilar with. Lol, I learned that the hard way way back when.

    That said, I’m an old hat Linux user (been primarily on Linux for ~15 years), so I generally prefer CLI solutions to user-friendly GUIs. I probably won’t reply here, but I will look into it so I can be of more help to the next person.

    That’s fine! I love hearing about the experiences of the “old guard” users! I think it’s fascinating learning from their wisdom!

    • sugar_in_your_tea@sh.itjust.works
      2·
      10 months ago

      A NAS is pretty simple, it’s just some drives linked together with some services on top. Mine is super simple:

      • 2 8TB drives in a mirror RAID, on an old computer
      • Samba configured to act as a Windows network drive
      • minidlna configured so my TV sees it as a source for content - there no “app,” I just go to “Videos and Pictures” and find my network share
      • SSH enabled for my Linux devices to login and push/pull files

      That’s it. You could probably get the same thing done with a Windows machine (but replace SSH with remote desktop).

      There’s no GUI for it like you’d get with Plex/Jellyfin or a commercial NAS, just a machine that streams files over the network. It has no access outside my network, so I’d have to configure something if I wanted someone else to access it.

      I threw it together over a weekend looking at the Arch Wiki. It does the job.

      GOG

      If you mostly use GOG, have you considered Heroic? It’s a launcher that can run games from Epic and GOG (and maybe others?), and it integrates WINE/Proton with it, so most of the time you just push play and it works. I’ve tried a few games with it and it seems to work well.

      It’s not the one you mentioned, but it has a decent interface.

      Linux newb

      No worries. I think most distros have a GUI interface to configure WireGuard. Look in the network settings to put in your keys and whatnot. If you do it that way, everything will probably work better together. Likewise for adding a network share to your NAS, though it’ll probably be in the file picker.

      Then again, maybe it’s something else. I remember being new to Linux and things not working until I reinstalled. It’s easy to forget a step, especially if you’re not really sure what you’re doing.

      Anyway, good luck!

      • EveryMuffinIsNowEncrypted
        1·
        10 months ago

        A NAS is pretty simple, it’s just some drives linked together with some services on top. Mine is super simple:

        ⋮

        I threw it together over a weekend looking at the Arch Wiki. It does the job.

        I…really really appreciate you going out of your way like that to help me. Really, I do. But I…really like having a service like Emby, Plex, or Jellyfin. I like seeing the posters and backdrops and other organizational aspects.

        Really, the only thing I want in this case is the ability to connect to my NAS through the local network within the file manager and transfer files between it and my computer.

        If you mostly use GOG, have you considered Heroic? It’s a launcher that can run games from Epic and GOG (and maybe others?), and it integrates WINE/Proton with it, so most of the time you just push play and it works. I’ve tried a few games with it and it seems to work well.

        It’s not the one you mentioned, but it has a decent interface.

        I have not actually! I may actually try that! Does it allow me to install games via offline backup installers? That’s how I generally install my GOG games.

        No worries. I think most distros have a GUI interface to configure WireGuard. Look in the network settings to put in your keys and whatnot. If you do it that way, everything will probably work better together. Likewise for adding a network share to your NAS, though it’ll probably be in the file picker.

        Then again, maybe it’s something else. I remember being new to Linux and things not working until I reinstalled. It’s easy to forget a step, especially if you’re not really sure what you’re doing.

        Yeah, I understand how VPNs work, and yet I don’t know what the hell WireGuard even does or how it works. Then, again, I’ve never looked it up…

        …I should probably do that.

        Anyway, good luck!

        Thanks!

        • sugar_in_your_tea@sh.itjust.works
          2·
          10 months ago

          I really like having a service like Emby

          And that’s totally fine. Linux should work just fine for that setup, I’m just not very familiar with it.

          Next time you’re booted into Linux, try the network drive thing again, maybe it’ll work better. I’m guessing you missed a checkbox or something to reconnect after a reboot.

          If you still have issues, I can try the GUI with my NAS, which should be similar enough to help. Just let me know what distro and desktop environment you’re running and what didn’t work.

          Does it allow me to install games via offline backup installers?

          I think so? I know there’s a way to import games, which I think works with an installer. Give it a shot!

          WireGuard

          WireGuard is just the built-in Linux kernel support for VPNs. The main alternative is OpenVPN, which runs as a regular program and generally has worse performance and VPN providers can be finicky about which clients work properly.

          So if a VPN service offers WireGuard, prefer that and things will probably work more smoothly.

          • EveryMuffinIsNowEncrypted
            2·
            10 months ago

            Next time you’re booted into Linux, try the network drive thing again, maybe it’ll work better. I’m guessing you missed a checkbox or something to reconnect after a reboot.

            Perhaps…

            Problem is I don’t have Linux installed anymore. After my switching attempt catastrophically failed last time, I (reluctantly) reinstalled Windows.

            WireGuard is just the built-in Linux kernel support for VPNs. The main alternative is OpenVPN, which runs as a regular program and generally has worse performance and VPN providers can be finicky about which clients work properly.

            So if a VPN service offers WireGuard, prefer that and things will probably work more smoothly.

            Oh! That makes sense. I can’t remember if ProtonVPN offers WireGuard support for Linux… I know it does for Windows.