• Ook the Librarian@lemmy.world
    link
    fedilink
    arrow-up
    82
    ·
    1 year ago

    Relevant xkcd alt-text 841.

    For years, I took the wrong lesson from that Monster Cable experiment and only listened to my music through alligator-clipped coat hangers.

        • DontRedditMyLemmy@lemmy.world
          link
          fedilink
          arrow-up
          5
          ·
          1 year ago

          I think noise coupling into ground could actually be a big issue. Depends if that ground is earth or just a local reference. The other wires still have “antenna” features though, so that’s the obvious worry.

    • kernelle@0d.gs
      link
      fedilink
      arrow-up
      13
      ·
      1 year ago

      If the connections are solid it wouldn’t pick up any more noise than a 6.5mm to RCA adaptor would have. Any jiggle to the cable would result in popping or cracking though, depending on the configuration could be quite jarring.

        • kernelle@0d.gs
          link
          fedilink
          arrow-up
          5
          ·
          1 year ago

          Well every conductor is an antenna in theory, in practice it’s the signal to noise ratio that matters, and I really don’t think this would add anything noticeable. The sticky uppy bit on the OP is connected to ground though so that’s negated.

    • oo1@kbin.social
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Insulating tape on the signal wires, then foil tucked around that ground wire.

  • Flying Squid@lemmy.worldM
    link
    fedilink
    arrow-up
    43
    ·
    1 year ago

    You can order an adapter for like a dollar on multiple websites. I mean yeah, there’s no Radio Shack anymore, but this seems unnecessary.

    • PM_Your_Nudes_Please@lemmy.world
      link
      fedilink
      arrow-up
      24
      ·
      1 year ago

      You don’t always have the luxury of time though. I work in entertainment, and I’ve definitely scrapped adapters together in a pinch. When you have a show starting in 15 minutes and a musician rolls up with some bespoke gear with weird connections, your only real choice is to bodge something together and make it work.

      Nothing quite like seeing five adapters chained together, to go from stereo RCA to TRS 1/8” to TRS 1/4” to dual TS 1/4”, to XLR… All because you didn’t have a direct box that went straight from RCA to XLR, because another musician walked off with it after their show wrapped up at 2AM last night.

    • pete_the_cat@lemmy.world
      link
      fedilink
      English
      arrow-up
      5
      ·
      1 year ago

      Apparently there is at least one RadioShack open. I saw a dude post a video on YouTube about one he found in Wyoming.

      • Buffaloaf@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        There’s one in Afton, Wy if that’s what you’re talking about. It has a giant “We Are Open!” sign that reminds me of Clerks

  • Aceticon@lemmy.world
    link
    fedilink
    arrow-up
    30
    ·
    1 year ago

    As long as whatever is on the other end doesn’t reproduce anything at 60Hz or does so with a lot of loss and there are no heavy vibrations closeby (such as the speakers themselves), it should be fine.

      • Aceticon@lemmy.world
        link
        fedilink
        arrow-up
        10
        ·
        edit-2
        1 year ago

        It’s the one part of the radio spectrum that’s also in the hearing range hence induced currents from it can be heard in an analog audio system and which would have a pretty decent amount of energy inside a building because it’s being emitted pretty much all around by the mains power wires.

        That said, you’re right that depending on the length and shape those wires might not form a very good antenna for that frequency. Independently of that, I doubt there’s enough energy around to directly affect speakers, but it might be enough if that wire goes to an amplifier which in turn powers the speakes.

        That said, I’m from Digital Systems rather than Telecomms or Audio so take what I say on this as a semi-informed guess.

        • willis936@lemmy.world
          link
          fedilink
          arrow-up
          3
          ·
          1 year ago

          It does have a decent loop area in between the signal and return path and any flux passing through it will induce noise. This area is too small for 60 Hz, but there’s a lot of microwave crap that would get picked up. If there isn’t a low-pass analog filter before the next silicon junction then this RF EMI will get rectified down. If it’s a sufficiently bad situation then you’ll hear it. That’s why you can hear garbage when you put your phone right next to crappy computer speakers.