It still prints great, but damn is it not that pretty anymore

And yes, it’s still flat

  • Anafroj@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    7
    ·
    edit-2
    1 year ago

    I’m more annoyed by the state of my plastic lid, to be honest. No amount of IPA has ever succeeded in making it clean. 😂

    • GormadtOP
      link
      fedilink
      English
      arrow-up
      7
      ·
      edit-2
      1 year ago

      Luckily my lid is currently mostly clean barring a few smudges from incidents

      I usually change my gloves before I touch it so it gets fresh gloves every time

      Edit: Also be careful with IPA on acrylic as it will damage it. I learned that with not 3D printing related stuff but long story short it makes it brittle and can make it foggy.

      • Anafroj@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        1 year ago

        Thanks for letting me know. :) Gladly (i guess), I gave up quickly and kept it dirty, so I’ve never seen any damage (presuming it can be seen). With my second resin printer, I similarly learned to really really be cautious! I now have two pairs of gloves, one for before washing the print, and one for after. It sort of does the trick, but the desk on which the printers sit is still a mess (a bit less so since I use a silicon cover on top of it and make sure to manipulate things only in that area).

  • anlumo@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 year ago

    I question your definition of flat.

    I’m always using a plastic spatula, so mine is pristine.

    • GormadtOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      No sharp protrusions that could puncture or damage the screen or vat. So I say flat.

      I was never successful using a plastic spatula so I used a metal one

      • anlumo@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        The trick is to include a wedge in the base of the print, then you don’t need much force. The standard base plate generated by ChiTuBox does have one already.

  • EmilieEvans@lemmy.ml
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 year ago

    Abrasive blasted for the perfect balanced of destruction free removal and print sticks.

    • GormadtOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      G217?

      That super clear non-yellowing resin?

      Very nice

      Most of my gouges came from ABS-like resin as well

      • HeyLow 🏳️‍⚧️
        link
        fedilink
        English
        arrow-up
        6
        ·
        1 year ago

        Yeah, it comes out real nice and clear with the only downsides being that it sticks to the buildplate like concrete and supports are damn near impossible to remove Had to pull out a rubber mallet to remove a print once

        • GormadtOP
          link
          fedilink
          English
          arrow-up
          4
          ·
          1 year ago

          Oof that sounds like a pain

          I’ll probably still pick some up to give it a try though… someday

  • Scratch@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    I have access to a surface plate, to I use that as a flat reference to sand my build plate back to flat.