Wired is more efficient, you can pick it up and use it while charging, and the cable usually comes free with the phone. What is the point of wireless charging pads?

    • sem
      link
      fedilink
      arrow-up
      8
      ·
      3 days ago

      Does the thickness of the case increase the heat byproduct of wireless charging?

      • FuglyDuck@lemmy.world
        link
        fedilink
        English
        arrow-up
        14
        ·
        3 days ago

        it shouldn’t.

        There shouldn’t be any heat at all from the signal passing through the plastic (It’s basically transparent to RF’s,). The heat mostly comes from the RF interacting with the metal in the receiving antenna and inducing an electric current.

        • MelodiousFunk@slrpnk.net
          link
          fedilink
          arrow-up
          12
          ·
          3 days ago

          The extra space isn’t going to cause more heat on its own, but the phone is still going to get warm, and a thick case can prevent that heat from dissipating properly. A good charging design will already have taken this into account, and start limiting current if the temp gets too high.

          The primary downside to using induction charging through a case is decreased power transfer efficiency due to the greater distance.

        • prole
          link
          fedilink
          arrow-up
          8
          ·
          edit-2
          3 days ago

          The case may prevent the heat from the phone (which should be the same) from dissipating so it can possibly build.

          • T156@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            2 days ago

            Although most phones made in the past decade will detect that, and suspend wireless (and possibly wired) charging if the phone’s circuits are heating, until the temperature drops.