The W and R keys don’t work on my ASUS vivobook flip 14 and I would like to fix them so I can give the laptop to a friend. The reason they stopped working is because I spilled water on them a long time ago. Other than that, the laptop works perfectly fine.
I saw some teardown videos for an entire keyboard replacement for it, but it looks wayyyyyy too complicated and easy to mess up. I have expierence replacing stuff like batteries and SSDs in computers.
Is there a way to replace/fix those two keys without taking out the entire motherboard?
The keyboard is probably short-lived anyway, so a replacement is a good idea. Just take photos of every phase of disassembly and keep the parts and screws arranged on trays or something.
A repair is theoretically possible with silver paint applied to the damaged conductive paths in the switching film, https://lemmy.world/comment/14076165 , but all the other switches will remain old and unreliable.
You might check what AliExpress has to offer. My Lenovo Ideapad 530S’s film-switched keyboard started malfunctioning at three years age. I replaced it even though it was melt-studded (?) in - plastic rods poke through the keyboard, their ends melted flat and wide. Some instruction video told me to cut the stud ends off with a chisel, but I used a mini drill. The most difficult part was to hold the keyboard pressed in its place with weights on sticks while doing a temporary re-melt of the insufficient rod ends with a soldering iron (I could have skipped that). After that, I covered the re-melted ends with epoxy for near-original strength. The repair was successful.
Probably not a way to just fix those two keys. I’m a bit surprised by Asus - it’s not usual to have to replace the entire top cover just to replace the keyboard. The teardown and reassembly looks a bit time intensive but not difficult by many standards. Did you look at the teardown guide directly from Asus?
No, I haven’t been able to find the one directly from Asus. The ones I’ve seen are off of YouTube.
From what I understand you don’t have to replace the whole top cover, you just have to get under the motherboard and tear some things up.
Google for “[model number] teardown guide” for the official documentation.
I had looked that up previously, and now after reading this I realized that the official teardown guide was there but was reposted on unofficial sites so I had overlooked them. Thanks for the recommendation
