So as I look to build my first dedicated media server, I’m curious about what OS options I have which will check all the boxes. I’m interested in Unraid, and if there’s a Linux distro that works especially well I’d be willing to check that out as well. I just want to make sure that whatever I pick, I can use qbittorrent, Proton, and get the Arr suite working
Depends on your experience, hardware, and other stuff.
You could easily use Debian or Ubuntu server and install Docker if all you want is those listed services installed on unRAIDed drives.
You could try something like Dietpi (which is what Ive used since I started self hosting) which simplifies a few things and gives some helpful scripts on top of a basic Debian installation. It’s a simple setup but still just plain ol’ Debian so easy to set up however you like.
You could use something like CasaOS or ZimaOS which offer Web interfaces and integrate with docker for those with a “no tech” background up to technical users.
ProxMox is an option, but takes a lot of learning proxmox-specific stuff and IMO might be a bit overkill for your first server.
Personally, I’d go for something accessible to your tastes because everything nowadays has some kind of “easy setup” path for Plex/Jelly + Arr. Once it’s set up, use it! Then once you need a big change for better hardware or more bespoke software setups then start digging into more fancy setups.
I actually want to prioritise the data protection of some sort of RAID setup, and support for torrenting and whatnot would be secondary to that. Really what I’m trying to avoid is installing and setting up my system only to find out that the OS I’ve picked is terrible for torrenting afterwards.
I have a workable setup on consumer Windows 11 right now, so I see the next step as having a dedicated Media Server box which can give me plenty of storage, data protection (right now a drive failure would wipe out half my server), and room for future expansion. Once that’s sorted, then I’ll look into the Arr suite and more advanced torrenting stuff. I want to pick something good for that stuff now, though, so I don’t have a ton of headache down the road
I think there’s some deffo better OSes than my suggestions for RAID setups and stuff, bar ProxMox. Maybe it is worth you looking into those options!
That being said, any OS can torrent shit just fine. If it can run Docker or other containers (so 99% of suggestions here) you’re set.
Maybe if you can spare the hardware try setting up a RAID on a couple of different ISOs to test em. That’ll be the harder, or more permanent, aspect of the setup I think.
I’m currently playing with setting up a home server on an old PC, using Proxmox as the main OS and using LXC and VMs for the services, not fully set up yet (still working on figuring out reverse proxy to make my services available on the internet)
It’s neat tho, and there’s some helpful scripts for installing various containers and things online.
I would need that because I’m basically starting from zero with learning all this stuff lol. Using Tautulli remotely is a challenge for me right now if that gives any indication of my level of knowledge here
I use Unraid on my NAS. I like it for storage, I don’t like it for running services. It’s still running my media stack, but only until I get that moved to a Debian server.
Depending on how involved you want to be and what you want to learn, Unraid might be a good fit for you. It’s easy and mostly just works.
How do Proton VPN and QBitTorrent play with that setup, if you know?
I second UNRAID, but also for your media stack. I have my home server running UNRAID and around 20 services, with zero issues.
Debian!
Always Debian.
Debian with docker compose or podman.
That’s what I’m running. I’m sure you could squeeze more performance out of a specialized OS, but headless Debian is fast and easy enough.
This. Besides, stability beats out 2-5% performance gains any day of the week, for servers.
Are there any resources available for how to do this? I feel like I more or less understand how Docker works conceptually, but every time I try to actually use it, I feel in over my head very quickly
look for docker-compose + whatyouwant specifically, it’s way more straightforward. once you have one set up, it get easier adding on different software.
Thank you!
The best thing is: if something doesn’t work, you tweak the compose file instead of having to retype or edit a command.
And you can have a GitHub of your compose files and any supporting config files.
I don’t get how some people can raw dog a docker run command!
Search for dockstarter and trash guides. It will give you the foundations of what you need
Thank you!
I have been fighting with Docker and Fedora on these exact items all weekend. Good luck
I’m very happy running lxc containers in proxmox
I just recently discovered proxmox and am slowly moving my docker containers off my NAS. Picked up a used Intel NUC, i5-8259, 32gb ram, 512gb HDD. It’s been great so far, very happy with its ability paired with proxmox.
any specific reason why switch?
Performance mostly, encoding is better, reducing load on my NAS and using it specifically for storage. Immich performs better as well, it’s pretty resource hungry I found. I also am planning to set up Frigate for home security and that’s the main reason I wanted something with a bit more power.
This has worked well for me too, for many years now!
I use Unraid and I’m loving it. Super stable, easy to manage, set up dockers, let’s me pool my hard drives and set up parity. Highly recommend. Only thing that I’ve had a hard time with is finding a stable flash drive - you’d be surprised how many start to fail when used 24/7
The thumb drive isn’t used all the time. I’ve been using a cheap USB drive that cost me like $12 several years ago, and haven’t had any issues yet. It’s been running constantly for the last year or two.
I had an issue recently where my usb drive was “disconnecting” which triggered unraid to give read errors and then panicking. I had checked though and it wasn’t being regularly read or written to but still caused my whole server to crash. Changing usb drive has since fixed it, for now 😄
Unraid would be a very good choice for someone who is reaching out and asking this question. Debian can do the same but I suspect it’ll be easier to setup and manage on unraid.
Disk management in unraid is also great.
Came here to suggest unraid as well. There are probably better options, but for a first timer, I can’t imagine a better solution. The ability to just add a hard drive to the array with virtually not configuration, as well as adding up to two parity disks is great. Caching is super easy too.
Plus they now support zfs so there’s that.
Using debian 12.
Now that Truenas Scale supports just plain Docker (and it’s running on Debian) I think it’s a great option for an all-in-one media box. I’ve had my complaints with Truenas over the years, but it’s done a really great job at preventing me from shooting myself in the foot when it comes to my data.
I believe raidz expansion is also now in stable (though still better to do a bit of planning for your pool before pulling the trigger).
The raidz stuff, as I understand it, seems pretty compelling. A setup where I can lose any given drive and replace it with no data loss would be very ideal. So I would just run TrueNAS scale, through which would manage my drives, and then install everything else in docker containers or something?
Easy, Linux. I prefer Arch based because of AUR.
I wouldn’t use Arch on a Server. Everything you install will probably be in a docker container anyway, so fast updates for system packages isn’t important compared to stability. Good choices would be Debian or Fedora Server. I personally use Fedora but the reason is just that I use Fedora on Desktop too, so I know they have really good defaults (They’re really fast in adopting new stuff like Wayland, Pipewire, BTRFS with encryption and so on) and it’s nice that Cockpit us preinstalled, so I can do a lot of stuff using a WebUI. Debian is probably more stable tho, with Fedora there is a chance that something could break (even though it’s still pretty small) but Devian really just works always. The downside is of course very outdated packages but, as I said, on a Server that doesn’t matter because Docker containers update independetly from the system.
Nah me neither, I had my desktop mindset going there. I use truenas scale, couldn’t be happier.
I use Alma because RHEL is designed for enterprise stability. Debian is also a good option.
Just don’t use Ubuntu. They do too much invisible fuckery with the system that hinders use on a server. For basic desktop use it’s fine, but never for a server.
Edit: but you should be doing most stuff in Docker anyway, so the actual OS isn’t going to matter too much. If you’re already comfortable with one base (Debian, RHEL) just use that one or a derivative.
Just don’t use Ubuntu. They do too much invisible fuckery with the system that hinders use on a server.
Would that warning also apply to Mint, since it’s based on Ubuntu, as well as other Ubuntu-based distros?
I wouldn’t use Mint or other desktop-focused OS for a server. Ubuntu’s advantage of newer packages gets largely negated by how long Mint takes to release a new major release, so I’d rather use Debian.
I do think Ubuntu is fine for servers too, like almost any other point release distro.
Probably. I don’t know what Mint or others do under the hood, but I do know they’re definitely targeted at desktop use.
I assume any Linux or *BSD distro will work, especially one with Docker (which is most/all of them?) so you don’t have to worry about things being packaged for your distro so long as there’s a docker image. My server is Alpine Linux.
openmediavault + Docker or TrueNAS Scale
So openmediavault running on the server, and then use one of the other two to get PMS, Proton VPN, qbittorrent, etc.?
I use Alpine Linux for server-based stuff because it’s so light and the packages are kept up-to-date.
