Hopefully this is not too long! There has been a lot of changes since the last time I posted a full overview like this

  • Fabbbrrr@lemmy.world
    link
    fedilink
    English
    arrow-up
    11
    ·
    1 year ago

    Wow. That’s really an overkill.

    Any idea what’s the power consumption of all that hardware?

    How many hours a month do you spend upgrading or maintaining the network and all other software?

    • GiantPossum@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      1 year ago

      Honestly, I’m not 100% sure. I don’t have a way to monitor just the stuff in the rack as the UPS also powers a lot of other stuff in the house. Either way, I’ve worked to make everything fairly low power, or at least as low power as feasible. The things that use the most power is the disks

      I can tell you its less than 800w though, as that’s the lowest the UPS goes at night. But that also does include both me and my wifes desktops which stay on 24/7, and an Apple TV, and standby power for all devices etc

  • Swarfega@lemm.ee
    link
    fedilink
    English
    arrow-up
    11
    ·
    1 year ago

    Question. I have a home network that’s more advanced than your typical house. I started holding back though as I figured when I die my family won’t have a clue about all the stuff I have setup. Do you guys ever think about this? I’d hate to leave behind a nightmare for my family members to remove and replace with a regular ISP provided router.

    • BendingUnit@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      I’ve thought about that a lot. I don’t know whether to try to type up a manual of how everything works or just leave instructions on how to revert to a more basic setup. Either way I think my family would struggle.

    • monotux@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      I’ve thought about it, and nobody will care about your/my elaborate setup after we are gone. It will just be replaced by a ISP router without regrets.

    • Cole@midwest.social
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      My opinion is that your spouse will have to get rid of any other hobby related stuff. If you’re a fisherman, she’s going to have to find something to do with all the tackle, boat/s, gear.

      I know a guy that was a woodworker who had a shop full of well over $20k worth of tools. Poor guy got cancer and died, and his wife had to try to get rid of all of it. Luckily she had some of his woodworking friends who helped her price and sell the stuff. (I got a pretty nice used planer out of the deal)

    • GiantPossum@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I have Bitwarden set to give my wife access if she requests it and I don’t respond in X days

      Things generally “just work” so she would have access to everything, and she can figure out what she wants to do. All the passwords are there and all of the configs are fairly easy for stuff she cares about anyway

    • withtheband@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Also thought about that a lot. The most important is that your people can access your data. My partner and bestie both have LUKS keys on all of my devices.

      Maybe do a test run with them to see if they can actually access it.

      • boonhet@lemm.ee
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        1 year ago

        Got it, sharing the password to my obscure furry midget porn collection with my people

  • node815@lemmy.world
    link
    fedilink
    English
    arrow-up
    10
    ·
    1 year ago

    Great job on the cabling and the setup! As an Apartment dweller, I hope you don’t mind my living vicariously through your setup!

    • GiantPossum@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      I’ve been there! Such a hassle. It was great when I moved and was finally able to do what I wanted

  • TDCN@feddit.dk
    link
    fedilink
    English
    arrow-up
    10
    ·
    edit-2
    1 year ago

    You said complete details… So where’s your private ssh key and public IP address?

    Cool setup btw. Would love to get my hands on such a system.

  • Blizzard@lemmy.zip
    link
    fedilink
    English
    arrow-up
    10
    ·
    1 year ago

    You must throw sick LAN parties…

    I love the fact that you have a favourite switch!

  • Decronym@lemmy.decronym.xyzB
    link
    fedilink
    English
    arrow-up
    9
    ·
    edit-2
    1 year ago

    Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

    Fewer Letters More Letters
    DNS Domain Name Service/System
    ESXi VMWare virtual machine hypervisor
    HTTP Hypertext Transfer Protocol, the Web
    HTTPS HTTP over SSL
    IP Internet Protocol
    NAS Network-Attached Storage
    NVMe Non-Volatile Memory Express interface for mass storage
    PiHole Network-wide ad-blocker (DNS sinkhole)
    SSL Secure Sockets Layer, for transparent encryption
    VPN Virtual Private Network
    Jargon Definition
    Raptor Methane-fueled rocket engine under development by SpaceX

    9 acronyms in this thread; the most compressed thread commented on today has 20 acronyms.

    [Thread #21 for this sub, first seen 11th Aug 2023, 00:35] [FAQ] [Full list] [Contact] [Source code]

    • GiantPossum@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      It sure can, but so far I’ve not found much use for it. I set it up to see if it can block YouTube ads in the mobile app, but it can’t. Since I already use uBlock Origin, I don’t know what I gain

      • dinckel@lemmy.world
        link
        fedilink
        English
        arrow-up
        10
        ·
        1 year ago

        At least from my experience, with a proper blacklist it shuts down a ton more stuff. Not just pure ads, but a ton of tracking and websites/apps phoning home too. You can configure it to be as strict or lenient as you’d like, basically. For me it’s nice, because I can just apply it to the entire network, and I don’t have to worry about trying to explain how this works to my family

          • retrodaredevil@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            Also has the benefit of being a completely local DNS server for all your devices to use. I think you are also able to add custom entries if you wanted to be able to refer to your devices using dns. It also has some caching benefits so there are less DNS requests going out of your home network.

            Personally I set up AdGuard Home because it has DNS over HTTPS support out of the box, which means your ISP cannot see your DNS requests. Pihole supports this too, but it requires additional setup.

          • Artemis@lemmy.ml
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            Check out the Star Trek theme for PiHole! It’s one of the default options.

  • Foreverwinter@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    ·
    1 year ago

    You. I like you.

    Honestly amazing setup. It’s more robust than some industrial applications I’ve seen.

    Thanks for such a great write-up. I’ll definitely be referring back to it as I upgrade my homelab.

    Cheers!

  • MigratingtoLemmy@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    ·
    1 year ago

    Hi OP. If you’re reading this, I have a few questions:

    1. You’re using the Linode box as the server, on which you forward ports for your services. Am I to assume that you somehow access your homelab via your VPN using the Linode box too? Usually people would access their lab at home directly.
    2. Wouldn’t a whitebox build for your NAS save power?
    3. What are you using both switches for? Are you running out of ports?
    4. Since you’re running VMWare, are you running VMs for every service? Why not containers?
    5. Even if most of the content on your blog is static, how are you hosting it for it to load so quickly? Are you using some sort of CDN in front of your Linode box to cache the static assets like pictures?

    It was great reading about your lab. I’ll try and follow your blog on RSS if you have a feed. Thanks.

    • GiantPossum@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago
      1. You’re using the Linode box as the server, on which you forward ports for your services. Am I to assume that you somehow access your homelab via your VPN using the Linode box too? Usually people would access their lab at home directly.

      Yes, I also access the lab via the Linode box. I do however have direct VPN access too. The reason for using the Linode box is that for some reason, the speed and latency via the Linode box is far better that directly in. I can only assume its some kind of peering thing. I always connect in via my phone on T-Mobile, so perhaps the connection between T-Mobile and Linode, and the connection between AT&T and Linode, is better than T-Mobile to AT&T Residential? Unsure, all I know is that it works 100x better. And it also means I don’t need 2 different connections for the primary and secondary WAN, I can just connected to Linode and it will connect over whatever connection is active

      1. Wouldn’t a whitebox build for your NAS save power?

      This really is a whitebox build, it uses very little power. The disks use the most amount of power, which there is no getting around

      1. What are you using both switches for? Are you running out of ports?

      The 1Gb switches? yes, I ran out of ports on the Dell, or am very, very close

      1. Since you’re running VMWare, are you running VMs for every service? Why not containers?

      Everything that can run in containers already is, on Debian VM’s within ESXi

      1. Even if most of the content on your blog is static, how are you hosting it for it to load so quickly? Are you using some sort of CDN in front of your Linode box to cache the static assets like pictures?

      I am using CloudFlare in front of it, so that’s probably why. But even directly its pretty quick. I guess NVMe storage and decent internet means its fast?

      Thanks!

      • MigratingtoLemmy@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        How do you relay your VPN connection over your Linode box? I can understand a direct VPN connection, but I can’t understand the networking behind relaying the VPN connection around the Linode box.

        Ah, yes CloudFlare is a great proxy/CDN. Thanks

      • GiantPossum@lemmy.worldOP
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        Good to hear! I replied above about it, here was my reply

        I am using CloudFlare in front of it, so that’s probably why. But even directly its pretty quick. I guess NVMe storage and decent internet means its fast?

  • 𝙚𝙧𝙧𝙚@programming.dev
    link
    fedilink
    English
    arrow-up
    6
    ·
    1 year ago

    Gah, treasure trove of info. Thank you for sharing! How’s the garage rack holding up? I’m so tempted to put some servers in my garage but the heat can get excessive.

    • GiantPossum@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Zero problems, often times stuff in the house is actually hotter than stuff in the garage funnily enough, even in summer