My full-time job literally involves dealing with systemd’s crap. There is a raspberry pi that controls all of our signage. Every time it is powered on, systemd gets stuck because it’s trying to mount two separate partitions to the same mount point, whereupon I have to take a keyboard and a ladder, climb up the ceiling, plug in the keyboard, and press Enter to get it to boot. I’ve tried fixing it, but all I did was break it more.
Uh… Sounds like it’s not really system’s fault, your setup is just terrible.
I don’t know his specific issue, but the general behavior of systemd going completely nuts when something is a bit ‘off’ in some fashion that is supremely confusing. Sure, there’s a ‘mistake’, but good luck figuring out what that mistake is. It’s just systemd code tends to be awfully picky in obscure ways.
Then when someone comes along with a change to tolerate or at least provide a more informative error when some “mistake” has been made is frequently met with “no, there’s no sane world where a user should be in that position, so we aren’t going to help them out of that” or “that application does not comply with standard X”, where X is some standard the application developer would have no reason to know exists, and is just something the systemd guys latched onto.
See the magical privilege escalation where a user beginning with a number got auto-privileges, and Pottering fought fixing it because “usernames should never begin with a number anyway”.
If it has a buffer overflow exploit that caused it to execute arbitrary code is his response that people shouldn’t be sending that much data into that port anyway so we’re not going to fix it?
(I feel like this shouldn’t require a /s but I’m throwing it in anyway)
I’m gonna laugh if it’s something as simple as a botched fstab config.
In the past, it’s usually been the case that the more ignorant I am about the computer system, the stronger my opinions are.
When I first started trying out Linux, I was pissed at it and would regularly rant to anyone who would listen. All because my laptop wouldn’t properly sleep: it would turn off, then in a few minutes come back on; turns out the WiFi card had a power setting that was causing it to wake the computer up from sleep.
After a year of avoiding the laptop, a friend who was visiting from out of town and uses Arch btw took one look at it, diagnosed and fixed it in minutes. I felt like a jackass for blaming the linux world for intel’s non-free WiFi driver being shit. (in my defense, I had never needed to toggle this setting when the laptop was originally running Windows).
The worst part is that I’m a sysadmin, diagnosing and fixing computer problems should be my specialty. Instead I failed to put in the minimum amount of effort and just wrote the entire thing off as a lost cause. Easier then questioning my own infallibility, I suppose.
My full-time job literally involves dealing with systemd’s crap. There is a raspberry pi that controls all of our signage. Every time it is powered on, systemd gets stuck because it’s trying to mount two separate partitions to the same mount point, whereupon I have to take a keyboard and a ladder, climb up the ceiling, plug in the keyboard, and press Enter to get it to boot. I’ve tried fixing it, but all I did was break it more.
Uh… Sounds like it’s not really systemd’s fault, your setup is just terrible.
If you’re unable to fix it, maybe get somebody else? Like, this doesn’t sound like it’s an unfixable issue…
I don’t know his specific issue, but the general behavior of systemd going completely nuts when something is a bit ‘off’ in some fashion that is supremely confusing. Sure, there’s a ‘mistake’, but good luck figuring out what that mistake is. It’s just systemd code tends to be awfully picky in obscure ways.
Then when someone comes along with a change to tolerate or at least provide a more informative error when some “mistake” has been made is frequently met with “no, there’s no sane world where a user should be in that position, so we aren’t going to help them out of that” or “that application does not comply with standard X”, where X is some standard the application developer would have no reason to know exists, and is just something the systemd guys latched onto.
See the magical privilege escalation where a user beginning with a number got auto-privileges, and Pottering fought fixing it because “usernames should never begin with a number anyway”.
I love that mentality to development
If it has a buffer overflow exploit that caused it to execute arbitrary code is his response that people shouldn’t be sending that much data into that port anyway so we’re not going to fix it?
(I feel like this shouldn’t require a /s but I’m throwing it in anyway)
Curious, how does changing one of them to a different mount point make things worse?
I’m gonna laugh if it’s something as simple as a botched fstab config.
In the past, it’s usually been the case that the more ignorant I am about the computer system, the stronger my opinions are.
When I first started trying out Linux, I was pissed at it and would regularly rant to anyone who would listen. All because my laptop wouldn’t properly sleep: it would turn off, then in a few minutes come back on; turns out the WiFi card had a power setting that was causing it to wake the computer up from sleep.
After a year of avoiding the laptop, a friend who was visiting from out of town and uses Arch btw took one look at it, diagnosed and fixed it in minutes. I felt like a jackass for blaming the linux world for intel’s non-free WiFi driver being shit. (in my defense, I had never needed to toggle this setting when the laptop was originally running Windows).
The worst part is that I’m a sysadmin, diagnosing and fixing computer problems should be my specialty. Instead I failed to put in the minimum amount of effort and just wrote the entire thing off as a lost cause. Easier then questioning my own infallibility, I suppose.
Does indeed sound likely to be an fstab issue, unless system services are being used in a really weird way.
can you get something besides a pi?