Hello! I’ve just started using StreetComplete, and I want to make sure I understand the answers before I go through and make a bunch of garbage data.
In this picture, is the kerb a ramp, or flush?
The sidewalk deflects downwards, but it’s not a ramp ramp like the example picture.
How about this one?
The kerb itself dips, but the sidewalk on this one looks more flat and does simply run into the road. And then it has the texture, obviously. Is this one different from the last one?
Also, just to check, I marked both of these sidewalks as “concrete”. That’s correct, right? I wondered about “concrete plate”, because they’re segmented, but the picture made concrete plate look much more substantial.
My other question was based on the “lit” tag for a bus stop. This bus stop has a street light near it, but there’s no light on the bus stop itself. It sounds like that means it is lit? Would a non-lit stop just be one that is fully dark at night, then, with no kind of lighting anywhere near it at all?
This one is further from the street light, but still has line of sight. Lit?
Thanks very much for any help you have!
You must log in or register to comment.
@psycotica0 https://wiki.openstreetmap.org/wiki/Key:kerb
Only use
flushif the transition would not be apparent to a blind person. Less than 3cm of curb. If a cane would catch the curb, it should be tagged aslowered.StreetComplete’s “curb ramp” option gives the curb the
loweredtag, making it the same as if you picked the “a bit higher than road surface” option.@psycotica0
concrete:platesare pre-formed chunks that can be moved into place.concreteis poured in-place, and is the correct value for sidewalks. I have never seen any actualconcrete:platesin use in real life, but SC users are tagging it all the time. They should honestly make the difference more clear in the app.As for
littags, I turned those off because I didn’t want to overthink it.Yeah, I think the image for concrete plates in the app is from the wiki, and is kinda unclear because it’s some rectangles of concrete. And I’m looking down and what I’m seeing is a series of rectangles made of concrete. I agree, though, with that in mind I feel like the app could benefit from some guidance there to say “concrete, perhaps with joints, such as for sidewalks” or “concrete plates, precast elsewhere and installed. Rarely used” or something. Just a bit of a nudge in the right direction.
@psycotica0 @uneabeille @openstreetmap
I think the key feature of the picture on the wiki is that they have visible lift points near the corners.
In some of the pictures they have been filled, but in others they haven’t.
https://wiki.openstreetmap.org/wiki/File:Bypass_road_made_of_big_concrete_plates.jpg
@psycotica0 @openstreetmap
I suppose there could be something tricky going on, but that just looks like normal concrete with ‘joints’ that have been cut or cast into it after it has been poured in situ. I think the concrete plate tag is for pre-cast bits that are made somewhere else and then brought in and dropped in place.Right, okay, that’s the way I interpreted it too. Thanks!
