Not mutually exclusive, but it’s highly probable that if you’re running a mainstream distro, the default kernel is in lockdown mode, preventing hibernation while secure boot is enabled.
Not mutually exclusive, but it’s highly probable that if you’re running a mainstream distro, the default kernel is in lockdown mode, preventing hibernation while secure boot is enabled.
Thanks for clarifying, and I can appreciate your overall concerns as I face the same dilemma with my aging relatives.
Just to confirm, have you opened these files in Word yourself (or witnessed them being opened), to verify they are in fact valid documents? if valid, are they meant to be in English?
It wouldn’t be the first time I’ve seen “other” files renamed with an incorrect file extension.
Assuming you meant “.docx files”, those should open without issue in LibreOffice. As others have said, OnlyOffice is another popular option if format preservation is a goal.
What do you mean when you say the files are “not supported” by the tools you’ve tried? What, exactly, is happening and what are you trying to accomplish? The end goal wasn’t clear to me from your post.
Getting Word to run under wine will require much more effort than copying the Word binary.
I think I’ve tried nearly every monospace typeface over the years and I’ve finally settled on JetBrains Mono for more than 2 years now, though IBM Plex Mono is a close second.
Looks great! I’ll definitely give this a try!
I don’t use RCS myself, but there are recent posts on the GOS forums and it appears to be working fine once all of the prerequisites are installed.
You’ve clearly done your homework, and you’ve gotten a lot of good feedback already, so I’ll just add a few points…
Storage options: Personally, I’d replace the existing drive with the highest capacity I could afford. In an ideal situation, I’d keep the host on another drive (NVMe or flash) and dedicate the large drive to a single partition of data storage.
In my own mini-PC (8th gen NUC), I’ve got a smaller NVMe for Proxmox and a single 8TB internal SSD for data.
Encryption: If you’re going to bother with encryption, I wouldn’t half-ass it. Why bother at all if you’re fine using auto-decryption or a weak password that will be guessed with any sizeable effort? Just lock it down with a strong password and decrypt/mount the data drive after any reboot; making a shell alias or script for this is trivial. You’re likely not rebooting the server more than once a week anyway.
Budget/Specs: I get the sense you don’t have much budget right now, but knowing your hardware would help in suggesting solutions. Do you have an NVMe slot? What is the make/model of the motherboard and case?
Filesystem: For simple storage, this really doesn’t matter and Ext4 will probably be fine. It’s a mature, robust, no-frills filesystem which is perfect for bulk file storage (docs, music, videos, etc.), but Btrfs would be fine too if you want more options.
USB Docking Stations: I’ve had really good experiences with USB docking stations like this one, and I currently use it for attaching my backup HDDs each month. I wouldn’t want to rely on them for realtime data access, but they do work wonderfully for backups and one-off drive access.
Amazon typically has a few vendors that specialize in refurbished Optiplexes and/or HP Elites in small or ultra small form factor sizes.
A word of caution about these refurbs though…the memory and storage they include are often dollar store brands (Kingfast) that I wouldn’t even trust for a child’s PC. It’s worth purchasing your own after the fact.
Your options will depend on many things…
I don’t know how demanding photoprism is, but you could probably do fine with a refurbished i5/i7 Dell Optiplex or similar, with one or more SSDs added to it. If money is really tight and storage needs are high, you could go with mechanical drives instead.
The problem with enterprise servers is that are generally very loud and use a lot of power…not unlike adding a second refrigerator to your environment. In my opinion, they’re not worth it unless you have a specific use case (training for a career, etc.).
You’ll need to provide specifics if you want solutions to many of these issues.
For the keyboard, there are several FOSS keyboards which support spacebar navigation, but you can also install Gboard and simply disallow any permissions, including network access.
Regarding Signal, this would be a reality for anyone with a non-Apple device. You may need to find a compromise and simply use SMS, RCS, or even just email when dealing with certain people.
There will always be one-off features available only on other devices or platforms. Only you can decide whether they are worth the cost of security and privacy.
If you’re now getting I/O errors that won’t even get you booted, it sounds to me like drive failure is imminent.
For what it’s worth, I’ve never had to change my io scheduler in the nearly twenty years I’ve used Linux. You can check your current scheduler with the following command: cat /sys/block/sda/queue/scheduler
(change the block device to whatever yours is…sda, nvme0n1, etc.).
In my case, it was already bfq: one mq-deadline kyber [bfq]
Distrobox will resolve your issue with VSCode and then some. Run archlinux, debian or whatever you want as a container. Then, install VSCode/VSCodium (and any other apps that Chimera lacks) inside the container OS. This will keep your development environment containerized and safely away from your host OS.
Thank you, sebastinas and gang!
It definitely sounds like a hardware issue since it has survived multiple disk wipes and distro changes.
I’ve been very happy with both Silverblue and Kinoite. I’ve installed it to all of my workstations now and can’t imagine ever going back to a traditional distro.
Your comments suggest that you’re already aware of distros like Silverblue so, if I may ask, how are these different than what you’re looking for? Silverblue comes with several flatpaks installed, but you can easily remove these and you’ll be left with a pretty barebones ostree image.
I’ve been super happy with my 8th gen Intel NUC i5. I put it in an Akasa Turing fanless case, installed an NVMe for host OS, and an 8TB SSD for data. It’s low power and so quiet that I couldn’t imagine ever using fans again.
I also have a USB 3.2 drive dock for external backup HDDs, but I only turn it on when actively doing a monthly backup.
8TB holds more media than I’ll ever need, but I do trim movies and shows regularly. For some, 8TB won’t be anywhere near enough, and SSDs exceeding this are ridiculously expensive.
We swapped our 2080s for 6800 XTs last year and couldn’t be happier…a 7900 GRE should be great for gaming, but I can’t speak to LLM performance.
I was able to extract the img from the ISO using geteltorito
as described in section 5 of this ArchWiki article. Once you mount the resulting img file, you’ll end up with the same file contents achieved by running their Windows BIOS Utility through wine.
The relevant binaries appear to be under the folders, N24ET76P and N24ET76W. Both scan clean for me, for whatever that’s worth:
curl -X POST -F'file=@N24ET76P/$0AN2400.FL1' https://pk.fail
{"details":{"analysis-time":"1.395106993s","hashes":{"md5":"ba73792a5fc831ca84b4cd3a21c03247","sha1":"24a5bb42d670c7705aed06588f0092ec11a32564","sha256":"b9510c73657460ae24c550b71d217a543b0fc3c30a3e081eff31d9d8f1a2bdda","sha512":"8ef6f0dcffbca05b79710b8599b1b1c926ee59185a675bc7eeede6da040c751097303ada523611271de6aaf190a597cdd6e9d5cf564d06987abcf712f61227c6"}},"status":"not-vulnerable"}
curl -X POST -F'file=@N24ET76W/$0AN2400.FL1' https://pk.fail
{"details":{"analysis-time":"1.438471526s","hashes":{"md5":"de1551b0bcc73e19375f7111def72278","sha1":"cd41f36d018f940c308a7be25a20e81bdb7e4cf2","sha256":"b3f646095e47bb94f04390c756cb4133201b1231a8b224174f10bb06bd3835f2","sha512":"55143f4903f92d88057bc9d4232b0d328e9ace36330f35fafdf0485d8bebb3f79b9fedc88ab1dec7fc04a8a3e0890887c1dd7632a2ffa397fb0917be90e3f93f"}},"status":"not-vulnerable"}
The linux command mentioned in the Ars Technica article elsewhere here is efi-readvar -v PK
. For Fedora and Arch users, efi-readvar
is available in the efitools
package.
Edit: Clarity
deleted by creator