• Zacryon@feddit.de
      link
      fedilink
      arrow-up
      12
      ·
      9 months ago

      Time efficiency in a modern urban area optimized for public transport and non-motorized transport modes compared to time efficiency in current typical urban areas, which are focused on individual motorized transport modes with severe lack of public transport:

      [Fancy chart: first case left, second case right]

      [Good] [Bad]

      • Colour_me_triggered@lemm.ee
        link
        fedilink
        arrow-up
        2
        ·
        9 months ago

        That’s nice, but in my town at least driving to work takes half the time of taking the direct bus and that’s with half the roads in the town being closed to private vehicles. To walk to work I have to walk for 2 hours without breaks down to the bridge and back up the other side or cycle for 50 minutes (at -10°C) this is compared to a 10 minute drive through the tunnel.

        I genuinely wouldn’t mind taking the bus if my kids daycare was open longer.

    • Dippy@beehaw.org
      link
      fedilink
      arrow-up
      5
      ·
      9 months ago

      Time us is so heavily dependent on location you cant standardize the data effectively

    • 7heo@lemmy.ml
      link
      fedilink
      arrow-up
      1
      ·
      9 months ago

      I get what you are trying to ask, and why, but unfortunately, such a comparison is not so trivial:

      Setting aside load (weight) and age differences, various transportation means use gear shifting in order to adapt the power output to the characteristics of the current load (as in “system load” this time). This adds a dimension of dynamism to the comparison, and most vehicles do not automatically and systematically impose an ideal efficiency constraint on the power output.

      To illustrate, using a single speed bike requires vastly different power than using a 7 speed bike. And different driving styles will radically change the efficiency of combustion engines.

      So, in addition to mapping the efficiency to various speeds, it should be mapped to various use cases (hence why combustion engines have different fuel economy in “urban” and “extra urban” situations).

      In the end, the graphic would not be 2D like this one, or 3D like it would be with “time per km” (or mile) vs energy requirement, and per type of vehicle, but there would be several 3D graphics, one per vehicle type, with time per km vs environment vs energy consumption.

      TBH I was gonna try and do that, but even with ADHD, I can see this is going to be mad time consuming. So yeah, no, I think I’ll pass. Good idea tho. “Someone” should do it. 😇