Hello, everyone. Recently I finally decided to update my system, and right after the update ran into a problem: before update baobab showed ~22 GB avaliable space, and after the update it went down to around 8.

Here’s some info, that might be relevant:

df output:

Filesystem     1K-blocks     Used Available Use% Mounted on
tmpfs             788700     1976    786724   1% /run
/dev/nvme0n1p8  53050368 48246568   4054792  93% /
tmpfs            3943496        0   3943496   0% /dev/shm
tmpfs               5120        4      5116   1% /run/lock
/dev/nvme0n1p8  53050368 48246568   4054792  93% /home
/dev/nvme0n1p7    998060   133944    795304  15% /boot
/dev/nvme0n1p1    364544    89768    274776  25% /boot/efi
tmpfs             788696      104    788592   1% /run/user/1000

du -h / shows 23G, du -h /home — 13G. Overall I have 54.3G disk space, so (23+13)/54 doesn’t add up to 93%

sudo lsof | grep deleted | wc -l shows 8433 deleted files that are still in use.

I also tried booting with liveUSB and running ‘check’ on partition via GParted.

I did some research online:

I tried some methods to locate what consumes all the space, but couldn’t figure it out. Also, the problem seems to be getting worse (right now baobab shows only ~5GB avaliable space). Can you help me find the source of the problem (and ideally also help me solve it :) )?

  • Still@programming.devEnglish
    4·
    9 months ago

    because you’ve updated be tween releases you may have a large cache of file for apt

    you may want to run sudo apt-get autoclean to remove old files that aren’t in the repo (replaced with new versions)

    apt-cache stats will tell you info about the cache

    • andnekon@programming.devOP
      1·
      9 months ago

      Running sudo apt-get autoclean && sudo apt-get autoremove was the first thing I tried.

      I am not sure, how do I interpret output of apt-cache stats?

      spoiler 
      Total package names: 126893 (3,553 k)
Total package structures: 122145 (5,374 k)
  Normal packages: 81989
  Pure virtual packages: 2797
  Single virtual packages: 22954
  Mixed virtual packages: 2708
  Missing: 11697
Total distinct versions: 101553 (8,937 k)
Total distinct descriptions: 180829 (4,340 k)
Total dependencies: 609988/159599 (14.8 M)
Total ver/file relations: 32564 (782 k)
Total Desc/File relations: 49757 (1,194 k)
Total Provides mappings: 50727 (1,217 k)
Total globbed strings: 239740 (5,895 k)
Total slack space: 65.4 k
Total space accounted for: 47.7 M
Total buckets in PkgHashTable: 196613
  Unused: 109956
  Used: 86657
  Utilization: 44.0749%
  Average entries: 1.40952
  Longest: 17
  Shortest: 1
Total buckets in GrpHashTable: 196613
  Unused: 103120
  Used: 93493
  Utilization: 47.5518%
  Average entries: 1.35725
  Longest: 8
  Shortest: 1
    • andnekon@programming.devOP
      1·
      9 months ago

      I run dual boot windows/ubuntu, nvme0n1p1 is efi system partition, p2-p5 are windows-reserved, and p6 is linux-swap.

      Also, I didn’t mention it in the post, but I recently grew linux partition up for around 16GB. I rebooted into windows several times after that, and everything was fine before the update.

      / and /home is just how I set it up.

      /var seems to take up only 1.2 GB. I don’t know, how can I check for any ‘cruft’

      spoiler

        • andnekon@programming.devOP
          1·
          9 months ago

          lsof -a +L1 / lsof -a +L1 /home

          No, the output of these commands is empty. U also tried running with +L, in both cases most of the files were ~100Kb, largest was telegram in /opt with 150Mb.

          Is it safe to remove /var/log? I almost never read logs anyway

  • JaxNakamura@programming.dev
    2·
    9 months ago

    A reboot will make whatever processes that are still using those deleted files let go of them. Maybe that solves your problem. If not, ncdu will help you find large files and directories.

    • andnekon@programming.devOP
      1·
      9 months ago

      I’ve already tried rebooting (as mentioned in the post, I’ve run GParted ‘check’ from liveUSB, reboot after. Also, I’ve done it seperately). And ncdu shows basically the same result as baobab — it doesn’t add up to 93% disk usage from df

  • andnekon@programming.devOP
    1·
    9 months ago

    I want to thank everyone for the help!

    I was finally able to find the issue. Thanks to @slappy@lemmy.blahaj.zone 's question regarding my filesystem type, I decided to look into it.

    I use btrfs, and this command showed me, that I have a lot of snapshots made by apt.

    $ sudo btrfs subvolume list -s /         
...
ID 318 gen 2617038 cgen 2566262 top level 5 otime 2024-02-13 06:59:10 path @apt-snapshot-release-upgrade-jammy-2024-02-13_06:59:10

    It was probably possible to determine how much space each of them was occupying, but I decided to simply delete them all and be done with the issue. So I installed apt-btrfs-snapshot and run delete-older-than 0d.

    As a result, I now have 29 Gb and no backups, which is fine with me.

    This answer on askubuntu was useful