• denast@lemm.ee
    link
    fedilink
    English
    arrow-up
    26
    ·
    edit-2
    10 months ago

    Side note, does anyone know some sort of cable sleeve similar to this that instead grabs onto the device and stabilizes the port?

    As much as I like type-C, the ports on my laptop have worn down significantly and aren’t always stable

    • ForgotAboutDre@lemmy.world
      link
      fedilink
      English
      arrow-up
      16
      ·
      10 months ago

      Depends on what you mean by stable.

      It’s likely dust in the port. If you gently clean it out with a toothpick or other small flat instrument you will get it to seat better. If dust is the issue, you should see some lint at the bottom of the port.

      • denast@lemm.ee
        link
        fedilink
        English
        arrow-up
        5
        ·
        10 months ago

        Sorry for not being clear, I’m not talking about connection stability, I mean the type-c port (female) becomes flimsy over the years and doesn’t hold the connector (male) securely anymore

        • LemmyTryThisOut@lemmy.world
          link
          fedilink
          English
          arrow-up
          12
          ·
          edit-2
          10 months ago

          Neither are they. If there’s dust or fuzz down in there, it doesn’t physically seat correctly, and ends up being wobbly.

          • rhandyrhoads@lemmy.world
            link
            fedilink
            English
            arrow-up
            3
            ·
            10 months ago

            This isn’t usually the cause. If the cable isn’t inserting fully then yes it can be dust and that often helps the problem, but the retention mechanism itself wears out over time leading to the cable slipping out easily and depending on the design things can get wobbly. I work with electronics for a living and with laptops more often than not it’s the latter category with dust not being too common of an issue since they aren’t kept in pockets. Phones on the other hand it’s usually dust, but I don’t interact with many USB C phones old enough for wear to be an issue.

        • Aasikki@sopuli.xyz
          link
          fedilink
          English
          arrow-up
          1
          ·
          10 months ago

          Have you tried a different cable? With usb c it should be the cable that becomes flimsy and not the port.

    • Scrath@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      9
      ·
      10 months ago

      Personally I have the opinion that usb-c should be a connector for mobile devices only and there should be something with the size of a type a or b for stationary stuff. The size makes the connector too flimsy

    • AwkwardLookMonkeyPuppet@lemmy.world
      link
      fedilink
      English
      arrow-up
      5
      ·
      10 months ago

      USB-C has been really fragile for me. Cables tend to only last a couple of months on my phone. People say it is a robust connector type, so idk if my phone is defective and destroying them, or if people are being overly generous about the connector resilience.

      • HardNut@lemmy.world
        link
        fedilink
        English
        arrow-up
        13
        ·
        10 months ago

        This was my experience with micro usb, and everyone seemed to agree they were total shit. As for USB-C, I’ve never even heard of someone having trouble with the actual cord. Generally the issue is that there is lint or something in the charge port. I don’t think I’ve ever thrown out a USB-C cord, to my memory.

        In short, check for lint, and if that’s not the issue then yeah it really might be your phone. Mind if I ask what kind of phone you have?

        • AwkwardLookMonkeyPuppet@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          10 months ago

          Pixel 7 Pro. It’s definitely not lint. I’ll try the cables with other devices after they stop working and they’re dead. I’ve resorted to buying the expensive cables and even those eventually wear out.

          • Mokopa@lemmy.world
            link
            fedilink
            English
            arrow-up
            3
            ·
            10 months ago

            I’ve had issues with the cable on my pixel 6 pro not staying seated - so I plug the phone in and if there’s slight movement and it stops charging, very annoying… I also had the same issue with my pixel 5, so much so that I had to get it repaired. I don’t do anything unusual wear and tear wise (like working on a building site), and since the 5, I always make sure the port is debris free before plugging in.

            It’s frustrating because I have an iPhone for work and the connection on that is reassuringly solid.

            • AwkwardLookMonkeyPuppet@lemmy.world
              link
              fedilink
              English
              arrow-up
              3
              ·
              10 months ago

              Yeah, the iPhone cable is nice. It’s just a simple male to female, not this double inception stuff that USB-C is. But USB-C is faster, and more universal. I guess the problem is probably my phone. I already had to get it replaced once because the port burned out. Great job Google! Nice flagship phone you’ve got there.

              • Zink@programming.dev
                link
                fedilink
                English
                arrow-up
                1
                ·
                10 months ago

                Do you often use your phone hand-held while it is charging? The devices should be able to handle it, of course, but it sounds like you’ve had a lot of issues!

                Agreed on the Apple lightning connector though. I am happy to see USB-c finally becoming the standard, but it’s mechanically a nice connector.

      • Trainguyrom@reddthat.com
        link
        fedilink
        English
        arrow-up
        5
        ·
        10 months ago

        My question is on the cables. I learned way too quickly that the quality of the cables matters a ton with USB C.

        I haven’t had any problems with USB C cables failing other than the one one of my kids chewed on

      • Strykker@programming.dev
        link
        fedilink
        English
        arrow-up
        3
        ·
        10 months ago

        I’ve had mine for like 4 years at this point and they are still perfect. I’m gonna go out on a limb here and say you are either buying cheap shit or are abusive as fuck with your cables.

        • AwkwardLookMonkeyPuppet@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          10 months ago

          Your limb has snapped, and you are injured.

          Neither of those things are true, but I think my phone port might be frying them. I already had to return 1 Pixel 7 Pro for a dead port that burned up a cable on its way out.

      • jpeps@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        10 months ago

        I don’t really know why your cables would be falling so fast, but to be fair part of the design of USB C is that, inverting the design of USB A, the connector is on the cable side, in the hope that the cable should be the part that deteriorates first. That way fewer devices get trashed for having dodgy sockets.

    • B0rax@feddit.de
      link
      fedilink
      English
      arrow-up
      5
      ·
      10 months ago

      Yes, but they typically require that the side on the laptop is also prepared for it. Look for example how the usb ports on toughbooks look. They have a screw next to them.