My mother gave me some skirts she doesn’t wear anymore, and a couple of them are pretty cute. The problem is they are too big for me. So how do I make them not too big?
I would start with a buffet place like Ryan’s. Some Hardee’s thick burgers should finish the job
I’m actually trying to lose weight, but if it’s the only option…
If it’s just a matter of the waist sliding off your hips, you can usually turn the skirt inside out, make a triangle with the excess waistline being one side and the opposite point being the hem, and then sew the crease like that. If you have details you would like to keep centered, do it twice, one on each side, with half the excess instead. I’d probably do this at the sides, where your hips would be.
Once that’s done, you can decide if you want to remove the triangles or not. If you don’t, you’ll have the option of letting it out again at a later date if necessary, but you’ll have those bits of fabric on the inside to deal with.
If the skirt is pleated, you can skip the triangle step and just sew the waistline excess together.
Okay, cool, that sounds simple enough, now I just need to learn to sew 😅
The hardest part of sewing is the part I told you: figuring out where to sew and why. Second hardest is getting the thread in the needle.
Your first sewing lines will look like crap, and that’s okay, because they’re on the inside where nobody can see them. That’s why we turned the skirt inside out first. =)
Oh, and if you want to lean into the jank, you can use a stapler instead. Does the exact same thing as sewing.
A tailor should help you sort your challenges.
Well I am pretty much completely broke and I have been wanting to learn some basics of clothes altering, so I though this might be a good place to start.
And a tailor will be surprisingly inexpensive.
Easy. Make them smaller.
Damn, why didn’t I think of that 🤦🏼♀️
lol how about this links to help you?
Thank you very much 😄
I’d turn it inside out and put it on, pinch the sides or back until the waist fits comfortably, then use safety pins to hold it together. It would be best to make this fold along a pre-existing seam.
After that take the pinned skirt, place it flat, and use something (washable marker or a sliver of soap work well) to draw a making line from the top of the waist to the fold. Use the safety pin as a guide for where to put the line.
After that you can just sew a straight stitch along your line all the way from fold to waist. Make sure to use some good sturdy thread. This is easier if you have access to a sewing machine, but if you don’t and need to hand sew it here’s a tutorial I found for a simple straight line.
After that try it on again and if it fits you can cut away the excess fabric. Otherwise, use a small pair of scissors to cut your stitches and redraw your line to be further or closer to the fold depending on the fit.
Awesome, thank you very much! This is really helpful
