• Rikudou_Sage@lemmings.worldOP
    link
    fedilink
    English
    arrow-up
    6
    ·
    1 year ago

    The reason for that is (I think) because of no wipe tower - when changing the filament, the nozzle is not pressurized and the eye was the first thing it printed with the new filament, meaning the first layer was not as strong as it should be.

    Printing a new one with manual wipe tower (and enabled ironing, which doesn’t help with this, but it looks much better).

    Screenshot of sliced project with wipe tower

    • Nighed@sffa.community
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      It looks like there is a holr there though? Is this not just a single filament switch at a certain layer height?

      • Rikudou_Sage@lemmings.worldOP
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        It is. I don’t know if it’s a Prusa MINI issue or a general one, but after changing the filament the pressure in the nozzle isn’t enough to get a good print.

            • Nighed@sffa.community
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              It lookes like that print just has one filliment switch? If that is the case, my query was why there was a hole where the eye is - should the white layer under it not just be flat?

              You may want to look at what the slicer is doing there and maybe change the infill settings.