In the case of drones, the fiber optic cable provides a direct, stable, and high-capacity link for both power and data transmission. […] The fiber optic cable also supplies power to the drone, meaning the UAV doesn’t need a huge battery onboard.
Sadly, the article has been written by a non-competent person.
I can claim to be a competent person and explain a bit.
At a drone’s own voltage (4…8 lithium cells in series), powering an FPV attack drone requires 2 wires of 2,5 - 4,0 square millimeters of thickness. One meter of this pair of wires weighs about 50 grams. One kilometer would weigh 50 kilograms, but would exhibit a voltage drop proportional to length, so in reality, you’d need to increase the diameter several times.
If one was into physical experiments, using super high voltage and thinner wires, this could be brought down, but voltage converters on both ends would gain weight and insulation thickness would have to increase: as you raise voltage in an electrical cable (e.g. into kilovolts) current starts arcing across air gaps and breaking though insulation. That’s why high voltage power lines have long ceramic / glass insulators. :) So building a hypothetical “330 kilovolt drone” would be the last thing anyone would do. :)
Fiber optic cable can’t supply power.
They could if it was a copper wire, but then it’s even heavier.
According to the article:
There’s no way that’s correct though, with current technology
Sadly, the article has been written by a non-competent person.
I can claim to be a competent person and explain a bit.
At a drone’s own voltage (4…8 lithium cells in series), powering an FPV attack drone requires 2 wires of 2,5 - 4,0 square millimeters of thickness. One meter of this pair of wires weighs about 50 grams. One kilometer would weigh 50 kilograms, but would exhibit a voltage drop proportional to length, so in reality, you’d need to increase the diameter several times.
If one was into physical experiments, using super high voltage and thinner wires, this could be brought down, but voltage converters on both ends would gain weight and insulation thickness would have to increase: as you raise voltage in an electrical cable (e.g. into kilovolts) current starts arcing across air gaps and breaking though insulation. That’s why high voltage power lines have long ceramic / glass insulators. :) So building a hypothetical “330 kilovolt drone” would be the last thing anyone would do. :)
Maybe this is why we shouldn’t have AI write articles. Does the drone have a solar panel on the other end of the cable?