I have an UPS with two 12v 7ah lead batteries. If I want to change the batteries I would typically go with lead batteries but here’s my question, can I use some portable mobile power banks to use it?

Because I have a 20000mah “INUI” lithium power bank that is rated for 12v at 1.5A, is it a good practice to buy several of these (since they are about 20 bucks) disassemble them and use them as ups batteries?

EDIT : clarifications

  • foremanguy@lemmy.mlOP
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 month ago

    I’m not that good in electricity but basically are lithium batteries from power banks would work the same as 12v lead car batteries?

        • MangoPenguin
          link
          fedilink
          English
          arrow-up
          3
          ·
          1 month ago

          3s would be 11.1v and 4s is 14.8v, so I’m not sure where you got 12v from.

          • foremanguy@lemmy.mlOP
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 month ago

            It is written on the back of the powerbank (sorry but I’m not so good in electrics)

            • MangoPenguin
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 month ago

              Ah gotcha, that’s the regulated 12V output with USB PD mode, and not the voltage of the battery inside.

              • foremanguy@lemmy.mlOP
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 month ago

                Ohhh okay, sad… Is there a way to get these 12v to use it instead of the stock lead batteries?

                • MangoPenguin
                  link
                  fedilink
                  English
                  arrow-up
                  2
                  ·
                  1 month ago

                  Not easily or cheaply, because of the voltage mismatch. Using a buck / boost converter setup tuned specifically for the UPS might work but would be pricey and probably not that reliable.

            • roofuskit@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 month ago

              If you’re this confused you shouldn’t be trying to change battery types in a device that can power appliances.