I got a P1S as a Christmas present for me and my wife. For now, my plan is to block its internet connection and stop using the Bambu app altogether. When/if it his stops working for me, what does the community recommend as a replacement for newbies like me, or future newbs who haven’t made this mistake?
You must log in or register to comment.
For completeness it’s worth mentioning that they posted a response to a lot of the more extreme allegations
https://blog.bambulab.com/updates-and-third-party-integration-with-bambu-connect/
Is X1Plus available for the P1S? If it is, that’s what you should switch to in LAN only mode. Can slice with anything and feed it over to the printer.
It’s what I did with mine, even though it was in LAN only mode already. Switch over before they disable that option. Already working on selling it though so I can get a Prusa CORE.
X1plus on an isolated network + pandaprint for an orcaslicer without any Bambu network plugins. (https://github.com/pandaprint-dev/pandaprint/tree/master)
I saw this coming a mile away. i made the right choice of printer :/
Really tho their software has already been broken into, it’s on repair.wiki. You can fix your printer
Are you within the EU?
I am not. Am in the US.
Hi,
sorry for hijacking the comment thread,
for those that are in EU (lets say they order via amazon.de)
what would You(also accepting anyones recommendations) recommend?If you ordered within their return period return it. Besides that, wait, at the moment
Now that this is shipping, I’m hoping it gets more exposure and reviews online:
I want a Core One, but am holding out for the kit version, which I haven’t seen anything announcing a release date. I can’t really blame them, I’m guessing 75% or more of their printers are sold prebuilt, but I enjoy getting my hands dirty and knowing exactly how my printers work.
I’m kinda surprised there haven’t been hands on reviews yet. I’m also kinda glad cause it means they aren’t sending out special review units to everyone just to get good stories out.
Unfortunately an heir apparent isn’t readily… Apparent in my eyes. All have tradeoffs. To be fair, Bambu did too but hid it better from most consumers.
Qidi isn’t terrible, and they have a decent track record. Their use of klipper is a big plus as well. But multi material is still a promise with no release or reviews, and they have had some duds in their history.
Prusa is an obvious option, and previously wore the crown. They’re a good bit more expensive, but perhaps that’s the cost of a highly ethical company that is deeply invested in the community. MMU is well understood and works great, but isn’t integrated in their latest printers yet.
Voron is amazing but absolutely still not for beginners. Besides that they lack for absolutely nothing. Some kits are approaching the user friendliness of pre built, but care and feeding is generally a more technical endeavor.
Creality is a good place to start generally, but lacks for features.
Long story short, if a friend approached me and demanded a recommendation, I’d push a casual user to Qidi, a demanding user to a Prusa, and a tinkerer to a Creality with the understanding I’ll be printing voron parts in a year or two
I’ve been wanting to build a Voron for ages, I’ve modified an i3 clone from anycubic to such an extent it’s not reflective of it’s original quality at all. But I find the cost and technical challenge a little too high. Recently Sovol brought out an inspired by and using open source basis copy of the Voron 2.4. Sovol SV08. It’s looks quite reasonably priced, but it’s still a big chunk of what I would have spent on the Voron budget, and only needs reassembly out of the box not a full build. I’m just not hearing enough of how they run to be inspired yet. SV08
Having gone through the Voron build, I would call it long vs hard. I am mechanically inclined and have crimped wiring before though.
Mechanically, if you’re not intimidated by IKEA furniture you’ll be fine. You do need a largeish flat surface to get the 2020 rails to all be flat when you snug them up, but a kitchen counter will do if you don’t have anything else.
Wiring wise, if you’re willing to spring for a ratcheting crimper with the correct die size for your terminal and wire gauge it becomes foolproof. If you use a non-ratcheting type grab some extra wire and terminals to practice on. Too lose = poor connection. Too tight = you’ll break the wires.
The Voron docs are pretty easy to follow and their forums are pretty solid for help. They also have a discord, but I’m old and prefer BBS style posts.
It may have just been a one-off, but I hated my SV07 so much that I’ve sworn off Sovol for good (the SV07’s constant issues are what pushed me to get a P1S, actually).
The sad reality is that we are going to see more and more printer companies building up walled gardens. There is money in models and the end goal is going to be one model site per slicer per manufacturer. There will still be the open source build your own printers but… there is a reason everyone recommended a Bambu over one of those.
As of right now? Qidi are pretty awesome in the semi-proprietary space and have a good track record of releasing the g-code macros required to interface with their printers (e.g. chamber temperature controls). Time will tell what they do with their multi-material solution though.
I don’t think we will reach the point of walled gardens for finding/downloading STLs. A lot of us are massive nerds and someone will stand up another STL host. There’s also GitHub, but without a STL aggregator it does kind of stink.
Most of the STLs are also developed by the community and are generally free themselves, although some are trying to create a revenue stream for themselves on places like Cults. I don’t think that’s a walled gardens though - creators are choosing to post their content there and ask $$ for it. Unless someone like Bambu pays top dollar for models, I don’t think they’ll be able to take over the STL market.
I have an order for a P1S that hasn’t shipped yet but am now considering cancelling it and buying a Creality K1C. Anyone have thoughts on that as an alternative? It seems their multi material thing is coming out soon
I’d probably cancel if it were me. Regretting not doing more research into bambu before buying my A1. I just heard they print well and not much fiddling. Bought it to replace my ender3
I ended up canceling my order and in the form let them know the reason. They refunded me my money and didn’t respond.
Now I’m trying to figure out what two actually get to replace my ender 3, currently trying to do research on the K1C and the Sovol SV08. I’m fine with tinkering, but I really want multiple color support
If you don’t care about multi-material, go off the deep end and build a Voron!
Oh, I’ve been tempted. It does seem like a little bit more than I want to take on right now, and I am really interested in multi material.
If you’re looking to do multimaterial creality just announced the kits to upgrade all the k1 machines to be compatible with their cfs. Last I checked the only viable mmu for the sv08 was coprint which is less than ideal imo.
TBH I’d cancel independently of what printer you get as replacement. Only way to reach these companies is by cutting into their revenue.
Yeah this sucks, I just bought an a1 mini with AMS, I love it. I do have it in LAN Mode with no internet and I still use bambustudio since I believe that is open source no? Lets hope they reverse this but I don’t see them doing that. Hope I can still use the printer without upgrading the firmware or somebody is able to make open source firmware for the a1 mini…
Man I hate tech space right now, every company grinding out as much money as possible anyway they can because “security”…
Try out OrcaSlicer. Same UI as Bambu Studio, actually open source and has more features. Can even login to your Bambu account to sync your filament settings.
deleted by creator
Wait I missed something. What happened with bambulabs?
Might be this?
Oh that’s not very poggers.
Definitely not poggers enough.
Just like you, I switched to LAN mode and I’m using Orca anyway. Gonna wait for it to blow over, it’s still a great printer for the price but next one will most likely be Prusa. I’m still happy with my A1M+AMS, it’s a great introduction to the hobby as far as I’m concerned. It’s disappointing to see Bambulab behaving that way, I hope they change course.
