Local-only octoprint is feeling better and better.

  • nyan@lemmy.cafe
    link
    fedilink
    English
    arrow-up
    30
    ·
    1 year ago

    Makes me very glad that my printer has a power supply with a big clicky hard-cutoff switch that only gets turned on when I intend to use it.

      • Rodeo@lemmy.ca
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        Yeah but now you have a smart plug in your house.

        Is the smart plug company going to turn it on in the middle of the night? You’ve just moved the problem from one closed, proprietary technology to a different closed, proprietary technology.

        • AnyOldName3@lemmy.world
          link
          fedilink
          English
          arrow-up
          4
          ·
          1 year ago

          Not all smart plugs are proprietary. You could even make one yourself with an ESP-01, a relay, and open-source firmware like ESP Home if you know what you’re doing to make it safe at that kind of voltage. If you’re overconfident in your ability to make it safe, then you’ve still got an untrustworthy smart plug at the end of the process, so it’s not necessarily a good idea, but it’s not proprietary.

          • Rodeo@lemmy.ca
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            Hmm that’s a good point. Never seen one for sale that I trusted though, and I did have a good look at one point.

            • dack@lemmy.world
              link
              fedilink
              English
              arrow-up
              3
              ·
              1 year ago

              There are many that can be reflashed with open source Tasmota firmware. Sonoff is one of the popular ones.

            • wigit@infosec.pub
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              IKEAs Trådfri plug can be adopted into anything that supports Zigbee. Works out of the box with Zigbee2MQTT. No flashing required.

            • scv@discuss.online
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              Don’t use wifi smart stuff. My house uses zigbee, so you have to be physically close to interact in any way. That really narrows down bad actors.

        • CobraA1@kbin.social
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          I’ve got my smart plugs on Zigbee, through Home Assistant, so they’re not on the cloud. But that did require some research so I could get the right devices, because it’s a bit of a minefield trying to find smart devices that don’t need to be cloud based.

      • neal33@lemm.ee
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        You don’t even need a pi for this option. I’m running octoprint off an old android phone and it works great.

    • Magrath@lemmy.ca
      link
      fedilink
      English
      arrow-up
      5
      ·
      1 year ago

      These printers come with that too. Just most didn’t have it turned off overnight when this happened.

      They should have it turned off because the Bambu lab printed have been tested and shown to draw much more power when idle compared to other printers. It’s not much but overtime it adds up.