I miss EVGA. :(
Are there any reputable vendors out there nowadays? I hope to keep my EVGA 3090 for as long as possible, but don’t know where to turn when I eventually upgrade… Maybe just buy a card from another vendor and re-do the thermal paste myself?
So here’s the thing, really: there’s a lot of companies that make good hardware.
The problem is there’s not a single remaining AIB that has above shit-tier support if something goes wrong. They’re all fucking awful to deal with, slow, and just suck. See: the recent ASUS support kerfuffle, except it’s not just ASUS so much as every vendor in those same spaces.
EVGA is missed because their warranty support team was fucking stellar in a universe of otherwise wet diapers.
Asus made me handwrite a note with a picture of the card in the computer in frame, and the box and receipt, just to register the warranty.
Assholes.
Part of me wants to believe that’s just one awesome support person at asus making random people jump through hoops…not a bad idea I’ll have to find a place for that in my IT workflow
Gamer’s Nexus is pushing for ASUS to have better support across the board. Their theory is if a leader in the industry does it, everyone else must naturally follow. I’m personally praying for their success.
Yeah, I hope they do, but I’m hardly confident they will.
Part of ASUS’s (and most everyone else’s) problem is they don’t do support, a 3rd party they contract with does.
So you have the stupid shit that happened, where the 3rd party company tries to get extra money out of you for repairs you don’t need, because it’s directly going to help their bottom line.
It’s some fucked up priorities: ASUS wants the cheapest vendor, and the cheapest vendor is going to try to find any other way to get extra money beyond contracted rates for repairs.
ASUS is just not getting my money till they ditch the ArmouryCrate bullshit.
I loved that gamer’s nexus video that had behind the scenes view of EVGA’s repair process. They were capable of changing GPU chips when necessary.
People will recommend this brand, or that brand, but I haven’t heard any consistently good stories about any of them like I did with EVGA.
My brother had an MSI AMD card and got denied an RMA because the HDMI port was supposedly burned out, which makes no sense to me. They sent a picture to us, and to me it looked like someone jammed a soldering iron in there or something. 🤷♂️
I think you’d be fine just repasting whatever card you go with. My spouse has an EVGA RTX 3080 FTW3, and I have an MSI RTX 3080 Gaming Z Trio. Both cards have been fantastic for us. If I stick with Nvidia, I might try a different brand but so far I’ve been very happy with MSI.
I have no experience with AMD cards, but I’ve heard that Sapphire is highly regarded, probably great like EVGA.
Intel I don’t trust yet, so I’ll wait before I consider their Arc cards.
Gainward. Always have been.
What happened to the?
They stopped selling GPUs because, in essence, NVIDIA is an asshole company. Might be over-simplifying it, but you get the idea
o7 heroes
Redoing the thermals with new pads and Thermal Grizzly Kryonaut turned my 114C crash happy RX 6700 XT into an 84C stable speed runner. Worth the effort for a used gpu.
Ah FFS, is this why my 7800XT is hitting like 90 degrees trying to run Final Fantasy 14?
Same here on the same gpu.
Kryonaut is the shit. My Vega 56 has been living under a water block for more than 6 years now and thanks to Kryonaut, the temperatures are exactly the same compared to when I’d just applied it.
How is this even possible??
9 out of 10 dentists recommend that paste brand!!This is something that simply, should not happen. This kind of mishap should have been weeded out during R&D.
I won’t say any more on it right now, and I definitely won’t excuse the behaviour. I do, however, want to give advice to anyone affected.
If you can RMA, then do it. If you just don’t want to deal with all that, and you want it fixed, whether you’re directly affected, or if you just have a hot/slow GPU, I strongly recommend redoing the thermal material. You don’t have to go all out with fancy phase change material or anything (though, that is definitely an option if you want to spend the money on it), but repasting shouldn’t be difficult.
My recommendation is to do a small amount of research and try to find something that’s not too expensive that is hopefully non-conductive, so any screw ups don’t end your card. If you can get thermal pads that are the right size, you might as well replace those at the same time.
Most of the time, getting the cooler off is simply a matter of taking off the backplate, unbolting the cooler from the GPU chip location (remove the tension bracket), then carefully pulling it apart, and disconnecting any fan cables/RGB as you go.
Clean existing thermal compound off with tissue/paper towel, etc, then clean and polish the surfaces (both the GPU and the cooler side) using alcohol, generally isopropyl, and either a microfiber cloth or something else lint free. In a pinch, q-tips work. Both sides should be a near mirror finish when you’re done, though, depending on the cooler, it may not have been machined to a near-mirror, so just clean it until your cleaning cloth/qtip comes away mostly or completely clean.
Once cleaned, apply new compound, fix any thermal pads and reassemble (reverse of disassembly). Be very careful when reattaching the tension bracket to move in a criss-cross or “x” pattern, always go opposite of whatever one you just tightened, and tighten everything just a little as you criss-cross the plate to ensure equal pressure across the cooler. Everything else should be trivial in terms of order.
Once everything is tightened and secure, reinstall the card and test.
The stock paste on my 2080ti was a joke. It would cause my hotspot temp to be >100 and the fans would go crazy. Repasted and now it’s great. Pita though.
Well I just re-tested my MSI 4070 Super Gaming X Slim. I got it back in January, and I reckon ambient temperatures were 3-4°c lower then.
Running the same tests, GPU temperature max was 4.9°c higher, hot spot was 8.1°c higher. Not much of an increase when normalised for ambient, but still an increase. Funnily enough the memory was exactly the same as before, and that uses pads, which does point to the paste getting less efficient, rather than dust (of which there is some).
Disappointing, but not all that dramatic. Don’t think I’ll need to repaste any time soon.
Hey, what are the exact dimensions of the part with the thermal paste? I’d be curious know just how much area is being covered.
As for the AD104, it has a die size of 294.5 mm^2, 35.8 billion transistors, 7680 CUDA cores, and 48MB of L2.
https://www.tomshardware.com/news/nvidia-reveals-secrets-of-ada-lovelace-gpus
