Sorry if this is slightly off topic, I searched for communities about tech support on here and couldn’t find anything that wasn’t dead in the water. Basically I want to use WPA3 on my Network, however my Windows partition doesn’t support WPA3 for some reason. I only keep that piece of trash around for school work. My Fedora Linux partition can use WPA3 just fine so I assume this is a driver issue. Is there any way to use Linux WiFi drivers on Windows?
(inb4 how the turntables)
It’s so ironic. Over the last few decades you could find millions of examples of the opposite question being asked.
Update the drivers on windows and see if the latest version supports it
Or
Install WSL or a VM and pass the device through to linux, let the kernel find it and activate the drivers, configure the network, then set up routes to share that connection with the host.
Run windows as a vm on your Linux machine.
For some the only way this would work for many games would be having a dedicated second GPU for passthrough to the VM.
OP is asking for school/work purposes.
This
I feel like this is a weird place to put this. However, since you asked, why can’t you run Windows in a VM?
I don’t use Reddit and like I said in the OP most of what I found on Lemmy relating to tech help were dead (no posts in over 10 months). Can’t use a VM due to lockdown browser.
Fair enough
Lockdown Browser is rated Platinum on WineHQ. I am not telling you to use Wine, though. https://appdb.winehq.org/objectManager.php?sClass=version&iId=42004
That’s not going to work
Probably you are right but I was shocked someone got the app to launch at all
If it’s a case of needing ad-hoc WiFi from Windows, an Android phone tethered over USB will act as a WiFi adapter of sorts.
Not sure why you got down voted, this is what I’m currently doing to work around it
As a workaround which does not solve your specific question, and assuming you have control over the WiFi network and the router would have to support it — set one network band on WPA3, and a different network band on WPA2. Then in Linux, connect to the WPA3 band and on windows connect to the WPA2 band.
May I ask what school work requires the use of Windows? Adobe creative cloud or something?
what version of windows? what wireless adapter?
Win 11, Something like Intel® Wireless-AC 6000. I dont remember if its 6258 or something like that, I just know its let’s than 9000 which is the minimum Intel requires for wpa3 for whatever reason. I can find the exact model # tomorrow if youre interested
I see.
There is no way to use wpa3 in windows with that wireless adapter.
Some of the answers provided itt will work:
running a vm hosted on windows with hardware passthrough and some simple operating system which does support wpa3 on that adapter bridged to your windows installation.
Running windows in a vm for lockdown browser has worked for me in the past. Try it and see. I used qemu.
Since you talked about it being your network and not some other person or institutions, you could always run two wireless networks, one supporting wpa3 and one supporting wpa2.
I do that everywhere for 2.5/5g so older devices can still connect to the wireless. If youre worried about a wpa3 thing connecting to the wpa2 network you can set them up with different passwords.
Is there a specific benefit of wpa3 you’re trying to get?
E: you could use a sbc that supports wpa3 and has an Ethernet port as some kind of mutant firewall/gateway like you do when tethering your phone, but that’s kinda silly…
E2: laptop or desktop? If laptop, what specific model? Often the wireless cards in laptops are replaceable and you could always put one in that has wpa3 in both Linux and windows.
Ideally I want to use wpa3 as its the latest standard and all of my devices (except windows) are able to use it. I left the model number in the other response you left :P
Hey, post the model of your laptop and I’ll point you at a replacement wireless card that can do what you want.
Its a “Sager N870HK”
If this is your laptop then it uses an “a” keyed card like this one for $30, which is listed as supporting wpa3 in windows according to intel.
Awesome, Thanks
Unlikely. While in theory someone could create a compatibility layer, it would be quite a challenge, as obviously, kernel modules are very closely tied to the specific kernel. I did some web searches, and only found the same few dead projects (that didn’t completely solve this issue anyway) that you found, and other forum posts that offer little encouragement.
Make sure you have the latest version of Windows 10 or 11, and the latest drivers for your network hardware. If you do, then there’s probably not much you can do about this.
Are the Wi-Fi drivers on windows up to date?
yes.
It is possible if you crosscompile the drivers for Windows. But switch to Fedora, it’s not hard.
You cannot cross-compile Linux kernel drivers for Windows. The API is completely different (and I kinda doubt anyone has made a compatibility layer like ndiswrapper).
Besides that, you won’t be able to get your drivers signed for windows to accept them, so it’s basically futile anyway
for school work.
Can you downgrade the network to older standard?
It would seem that there isn’t easy way to do it on windows. You would need to RE and write the drivers yourself.
deleted by creator
Uh, ok I guess
Have some commas, my man: ,
Find me an Intel driver for a pre 9000 series laptop adaptor that supports wpa3 for windows and we can talk about “keeping it up to date” :)