[EDITED for clarity]

Hi folks. For my next wireless split build, I’m exploring battery options for easy replacement while travelling. In this scenario, the battery’s reached its end of life and needs to be disposed of/replaced with a new one. However, it’s difficult to receive parcels or have access to a workshop while on the move, so the dead battery should be swappable without specialised tools, and the replacement battery should be easily sourced from any local hardware store.

For some background, this just happened to me. The LiPo in my current board was directly soldered to my nice!nano (bad choice, I know). Used the board on wired mode for a while, but the USB-C port became loose at some point due to accidental dragging and unplugging (I couldn’t find a magnetic USB adapter). Most local shops didn’t have the 3.7 V thin-ish LiPos that I often see in wireless splits, and language barrier made finding things difficult. Fortunately, I found a replacement battery (of dubious quality), but I want to make a dedicated battery slot in my next upgrade/build in case this happens again.

I know adding JST connector is an option, but the issue is, 3.7 V LiPos can be hard to find in some countries. I’m thinking of using AA or AAA-sized batteries (one-time usage or rechargeable type). Or use an RC LiPo (7.4 V?) but step down to around 3.7 V. Not sure what additional circuit or component would be required for this.

Has anyone tried to use such batteries for your split keyboards, or have seen a project that uses them? Also, if not AA/AAA-sized batteries, what other types and/or build would you suggest for this scenario?

(Photo from: https://www.dnkpower.com/lithium-polymer-battery-guide/)

  • Virtual Insanity @lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I’m pretty good with batteries, but I don’t know if I understand the issue.

    Isn’t the keyboard already rechargeable? If so then why isn’t charging it an option?

    What are you using the keyboard with? How does that device get power?

    Is recharging or using a power bank absolutely out of the question?

    Are you looking for a temporary, semi permanent or permanent solution?

    Are you strictly limited to common convenience batteries? How about slightly uncommon batteries like cr123?

    • hisbaan@lemm.ee
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      When they say dying battery, I don’t think they mean discharging. They mean the battery has reached or is reaching the end of its life in terms of charge cycles and capacity