I have a moonlander and love it, but that’s technically columnar and not ortholinear since it’s staggered rows. One thing I like is the Oryx software that I found very intuitive and easy to use to update layouts and layers. Although some question build quality, it was cheap to find someone on printmything to 3d print extra feet for the thumb cluster to add stability to the cluster. Swapping switches was easy as well and installed U4Ts to get more tactile feel.

But I found it helpful to print shit out and play with it on a desk to get a feel for size and layout difference in lieu of seeing a real keeb. You can get creative with folding stuff or angled binders to simulate tenting options as well. This tool lets you do size comparison and print out different keyboard layouts on paper. https://jhelvy.shinyapps.io/splitkbcompare/

You have mentioned two keyboards that took your attention the Piantor and the Moonlander.

So let’s breakdown them, and let’s see the major benefits:

• If you have to travel a lot and dont want to spend much to try a new cup of tea, you should go for the piantor; it’s cheap, really easy to build (thanks to the diodeless feature), tentable (see on the community for tentable case) and portable!

• Instead if you don’t need to travel and you are sure that you want to switch go for the moonlander; Despite it’s high price it has a really large community and it’s built to make the average user feel at home. With the number row, tentable, full-size mx switches; it’s a really good option if you dont have to travel that much!

• If you want a middleground of those, I can suggest the Sofle, it is a very popular keyboard too and has a number row;

This is the beauty of this community, everyone has it’s preference and we love to build keebs on those!

Let us know what will you take and your feedbacks!

One unfortunate thing about ergonomics is that each persons needs are different. No one can tell you what’s best for you, but luckily we have a lot of good options that help you find what does work for you.

If you’re fine with some soldering, there are a lot of open source splits that you could get fabricated for pretty cheap and end up with two full builds. Cantor, Piantor, Corne, Lily, Sofle, etc etc etc. The low cost of having them fabricated and built yourself can mean trying out a few different keyboards to see what works best for you.

When it comes to gaming, maybe using one keyboard for programming and a different keyboard for gaming. It could be just half of a 4 row split, a gaming focus keypad (like the Eternal) or just your current rowstagger board. I personally use a QAZ-alike I designed as a gamepad.

Tenting can be accomplished multiple ways. Some boards have Tenting Puck support. Some can have large bolts added to adjust the angle. For boards without some native tenting support, many 3d printable cases exist that provide tenting and lately I’ve seen a lot people use the magsafe sticker thingies to attach their keyboards to small tripods.

One reason there are so many options is because it’s pretty easy (and fun} to design your own keyboard. It’s not uncommon to try a few different designs/layouts to see what works best for you from each and then design a keyboard to fit your requirements. Designing your own keyboard comes with it’s own set of information overload, but there are a lot of us around to help us.

If you’re down with DIY and Stateside, hit me up. I’ve got a bunch of PCBs in a box that I can part with for stupid cheap. I’ll need to take an inventory of what I have but if you’re interested I’ll gather up the info. I know I’ve got at least an MX Corne.

Link Dump:

• Cantor
• Piantor
• Corne
• Lily
• Sofle
• Eternal Keypad

Seconded on Sofle, though Moonlander would be a good choice too. Having the numrow helps ease the transition and reduces the chances that you give up on ergo splits. If you buy a 50+ split and later get the minimalist bug, you can change your keymap to test drive a numrowless layout.

I use Sofle V2 for WFH. I started with a Lily58 at the beginning of the pandemic because I was getting shoulder and wrist pain from using a TKL all day. I liked the Lily58, but I also have big hands and found the thumb cluster cramped and the stagger too shallow. The Sofle V2 is nearly the same layout except the thumb row is moved out by a column for more natural thumb placement. I’ve been using the Sofle for a little over a year now and am planning to build another for the 1 day a week I need to drive into work to hotdesk.

QMK is great, but I switched to VIAL, which is a fork of QMK that allows for on-the-fly keymap changes from an app without having to recompile.

OP, DM me at al177 on Discord if you’re in the US and decide to DIY a Sofle. I have extra unpopulated V2 main PCBs (not top or bottom tho) and would be glad to send you a pair to get you started. I also have a Lily58 I would part with for cheap.

I have a lily58 right now, since I didn’t want to jump into a really small board right off the bat. I’ve now reduced my layout down to 34 keys which I think is best for me. As a result, I’m building a chocofi to get a feel for low profile switches.

That said, apparently the cheapino is a slightly cheaper build that is 36 keys and uses MX switches.

I haven’t gamed on a 36 key layout yet though, so I’m not sure what that will look like.

The main thing I regret about the lily58 is the minimal pinky column stagger. I want it to be much more aggressive, which is part of what pushed me to try the chocofi. If you wanna compare layouts this site may help you figure out what keyboard would be good for you.

As for tenting, there a bunch of DIY methods to do it. I recently got what’s called the manfrotto setup, using magsafe and tripods to tent. It’s a bit more expensive but really sturdy and modular. Good luck picking out a keyboard, I hope you find one that works well for you.

I recommend to try corne v3. It’s a super popular keyboard with huge community, tons of cases and cheap to build. I’m currently using it.

Welcome to the infinite rabbit hole! At this point I’ve decided that actually, I’m just an ergo mech keyboard collector…

IMO, if you’re just starting out, the Moonlander is one of the best options. It can be hotswap, which will help you figure out what kind of switches you want. It’s incredibly durable and reliable. It’s got the best configurator software of all ergo keyboards, in my opinion. Unless you have really small hands (like I do) it works quite well for most people’s needs. And even if you get into the even more niche boards, having a board that you can count on to reliably work like the Moonlander is always going to be useful.

Getting into stuff like the Piantor is a lot more about narrowing down the specs you exactly want in a keyboard. Honestly, it’s hard to know without just diving in and trying it. The Moonlander is great in this way as well because you really don’t need to use all of the keys on it. I would also put on your radar the Corne, the Microdox, the Kyria, and the Iris. All amazing boards, all fulfill slightly different needs :P

Another way to figure out which board is best for you is if you have active pain or injury, you can go backwards from there. But it seems like you’re doing something more preventative rather than reactive to pain.

I have a Sol 3, which is very premium (so may not fit your needs while you’re exploring) but it does meet all your requirements and is better-built than the Moonlander (metal top and bottom, screwless).

Thank you to all of you for the great advice <3

I think for now I’ll get a Moonlander, or at least something similar, and in the (very) long run, if I’m not satisfied or it doesn’t suit all my needs, invest in a soldering kit and a 3D printer to start testing out more and more smaller diy style keyboards (depending on how many I’ll test that’s probably cheaper, tinkering is fun, and I’ll probably find other uses for those as well) to see what fits me best, or what I could use as a secondary option.

But for now, I’ll just get a nice base that will certainly work. Experimentation comes later. Thank you all. I’ll be sure to at least have a good look at all the keyboards recommended here, and make a list of my favorite ones for long-term experimentation, but at the time I just don’t quite have the money for more than one keyboard, even if many of them seem very cool (；・∀・)

I fell into this rabbit hole when looking into all the options available when ordering an Ergodox EZ. I discovered the Iris keyboard and really liked its compact shape. I ended up not placing the order for that Ergodox and built myself an Iris v4 instead.

Iris turned out to be a good way to ease myself into the world of DIY split ergo boards. It’s affordable, easy to assemble and has enough keys to ease the transition from full sized keyboards. It’s a good starting point for experimenting with layers and other features that eventually may lead you to 40% or smaller layouts.

I got an iris v7. It checks all your boxes and it’s got hotswap sockets pre installed.

I am signed up for the ZSA newsletter. They just sent an email with the subject line called “The Ergo 58.” In it they discussed why they are are no longer making the compact Planck EZ, but said:

“In response to my original announcement about the Planck EZ going away, we got a whole bunch of people professing their love for compact keyboards and wondering if we’ll ever make another. To which I can say — we love small keyboards too, and… stay tuned. :)”

They didn’t discuss anything about the keyboard in the email body. So maybe waiting a bit would be a good option if you are looking for something more compact and portable. Not sure if they will be making a compact ergo split key keyboard, or something more in line with the planck.