First time printing with TPU. Another problem I had was that it didn’t stick to the textured print bed, had to go for smooth PEI which I read (and now can confirm) is not ideal. Would satin be better?

    • TwanHE@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      All depends on your extruder. A decent extruder should have no problems with 200mm/s+

        • TwanHE@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Just because you can’t get it working doesn’t mean it’s impossible. Vez is printing tpu benchys under 6 minutes, so it’s clearly possible.

          • MrSlicer@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            I don’t know what you are talking about. I make real things out of tpu that get used everyday for years. I don’t know who pez is and I’m not interested in bench speed runs.

            • TwanHE@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              I get that speedbencys aren’t functional objects but as long as you’re not running out of flow rate the material properties shouldn’t differ between 20mm/s and 200