This is my latest work - a Mitsubishi Space Star (also marketed as Mitsubishi Mirage) modelled in Version 3.6.9.

It took me approximately 180 hours which spread over the course of 6 weeks (Blender, modelling only) as well as an additional 8 hours for tracing the side, front, back and top view (using Affinity Designer) which I used as reference images to create the general shape.

All details were built with eye measure from photos.

Most of the car is symmetrical, which means that only one half had to be built. I used the mirror modifier for almost everything as well as the subdivision modifier, shrinkwrap modifier (for the decals and the back lights) and array modifier (for the grille and for the heating lines in the back window, also for the wheel caps to an extent).

As mentioned above it took some hours to complete the work. One reason might be that the work process is much slower than anticipated, due to lack of knowing all the tricks and features.

My question to you is: Do you also spend so much time creating your work with Blender?

The result (for the upload I removed the number plates):

  • nicerdicer@sh.itjust.worksOP
    2·
    7 months ago

    I start with the easiest part: The gas tank cap on the rear left side and the towing hook cap on the right front bumper. These parts were done surprisingly fast (15 min. each). Also the lock on the drivers door (5 min.).

    Most tedious: the windshield wipers. Mostly because they were so small compared to the rest of the cars parts, which made it hard to navigate and zoom (already switched the units to millimeters, but still), and all three (2 in front, 1 in back) were individually shaped, so no mirror modifier could be applied). I just had to pull through during weekdays evenings. I would guess it took me 10 hours for all of them.

    Medium: the front bumper with the fog lights and the lower grille as well as the upper grille: This took me a whole Saturday and Sunday; the upper grille was made during the weekdays - I would say 3 - 4 hours.

    Hard: the inner structure of the front light. I had multiple photos of the light from top, side, front, etc. The main problem was that this thing is made of chrome (and plastic probably) which it made it hard to see the form/shape. And since everything else is made with eye measure, I had to alter the size and proportions to fit into the model. The problem was that when I (thought) I was finished, it stuck out of the side of the front glass cover. So I had to scale it down and had to re-arrange everything. I also made some simplicfications for the reflector. In the model it looks more like a disco ball. That is not the case with the real thing, but it was easier to merge a sphere with extruded lines to archive the relector-type appearence. See photos. This part took me the longest. I would guess it took the whole weekend (Saturday and Sunday) as well as some days during the week - approximately 25 - 30 hours.