Update: it took time. And then a quick pry with a knife. Saved the dishes. Ravioli saved too but for raccoons outside probably lol. What I learned about physics…sheesh.
UPDATE PLEASE. I must know the fate of the dishes.
It has been 6 hours since OP created the ravioli black hole that will eventually consume our planet. I think of all the wasted years I spent worrying as oblivion heads my way.
OP pls….
OP responded that he microwaved bowl and plate, and that some plastic melted and fused them both.
@Theo@lemmy.world - can we get an after picture?
edit: context: https://programming.dev/post/28471691/16271644
I don’t think I’m your guy haha. I do not have a ravioli bowl unfortunately.
Thank you! I was WAY too invested in this!
No one is going to mention that OP has a bowl specifically for ravioli?
I think it’s just a bowl currently full of ravioli
No issues with either one of these options tbh
Well how do you cook ravioli? In your fettuccine bowl?
Pour it onto a dish rag and microwave it? I thought this was common knowledge?
…in a pot?
But which pot?
Not my oatmeal pot, or the spaghetti pot
Definitely not the macaroni pot
These jokes about different pots for each meal are funny until you live with a hoarder for awhile who must have enough pots to cook each food in its own (even though they use the same pot or pan for everything they cook). Ugh it sucked lol
Ew, what’s wrong with you
I’m confused why there is a plate involved at all.
I would guess he had the plate over the bowl, while he was microwaving it, to prevent the little sauce splatters during heating.
I hope OP learned to use a paper/dish towel from now on if that’s the case lmao
Hot air cooled, contracted, and created partial vacuum is my guess. Make it hot again and it will unstick, I bet.
I was gonna suggest just running hot tap water over it for a few minutes until the air inside expanded enough.
Or chuck it in the freezer!
And shrink the air more?
No, but the items will get slightly smaller, eventually making an air gap you geniuses.
You do this with crankshafts for example, to get the bearings off so I’m not pulling stuff out of my behind.
Yeah but those are different alloys with different thermal expansion and a significantly larger temperature differential and a friction fit, this is a vacuum issue
Seems OP sorted it out without your help so yeah …
Cool one slightly while warming the other.
Probably sit the bowl in warm water with ice on the plate. That will increase the pressure inside and aide in the separation.
Would you want the opposite?
I thought heading the bowl will expand it slightly and increase the suction, cooling it will shrink it and reduce it.
Hot air expands and cold air contracts. You want the air in the bowl to be hot so it’s not creating negative pressure.
I did not think of that, thanks!
Its the same thing that happens with fridges and freezers. But they have become better at equaling the pressue.
PV=nRT https://en.m.wikipedia.org/wiki/Ideal_gas_law
Change in temperature (T) means a change in volume and/or pressure
The air inside is what is causing the vacuum heat the air, expansion, less vacuum. Cool the air, shrinks, more suction.
Heating both likely the smoothest solution.
Thanks! I had not factored that in
I could be wrong, but I really believe heating the bowl is the correct answer.
No, warm the whole thing to heat the air inside
The McDLT solution
Put the whole thing in a pot of water and start bringing it to a slow simmer. This will warm the air inside, expanding it and breaking the suction. I got my stuck blender jar open this way, taking it out as soon as the first tiny bubble escaped and quickly unscrewing it before it could cool.
Someone slept through physics class a few times.
Heat and/or cold would be your friend in this situation.
Personally I would just toss the whole thing in the freezer for the night, but there is a small chance that results in a broken plate in the morning.
If you have an air compressor a blast of air right against the lip of the bowl would probably also pop it off.
Other than that just run hot water over the bowl (or submerge it) and then get the plate cold while being careful to not have the hot water touch the cold plate or visa versa.
Best of luck soldier.
Wouldnt be the opposite? What’s keeping the plates together is vacuum. What it needs is to heat the gas inside to make it expand and reduce the vacuum
Let me walk you through my 3 different answers.
-
Shrinking the bowl and the plate at the same time might just pop the seal when left in the freezer all night. It would only take a couple Crystal forming in the right spot to break that seal.
-
Blasting air into the seal could potentially resolve the pressure difference holding the bowl to the plate or force enough air into the bowl that it actually builds positive pressure inside and that pops the bowl off as well.
-
Heating the bowl would get it to expand slightly and cooling the plate would make it shrink slightly so doing them at the same time could cause the perfect seal they have formed to shift enough that it allows the pressure to equalize/release.
It’s less about heating the gas inside the bowl to reverse the vacuum and it’s more about breaking the seal that has formed in the first place.
But heating the gas inside would also work because, no matter how perfect the seal is, it won’t matter if there is no vacuum to hold the two pieces together.
This is the answer. Leave a hair dryer blowing at the thing for 5 or 10 minutes. It will heat the bowl, and also heat the air inside, which will expand.
Amazing. Thanks!
-
The plastic was fused to the glass some how. I pryed it off and salvaged the plate. Also, I already tried all of that.
Oh you melted the plate to the bowl lol. That’s kinda impressive. It does make me wonder if your bowl was not dishwasher safe to begin with. Things shouldn’t be melting/fusing in the dishwasher.
*microwave and they are “reheat only” technically
deleted by creator
Hot ass water
Edit: Clarification: Poor hot ass water on it or dunk it in hot ass water
Edit 2, electric boogaloo: This is dependent on the material, according to my mother
Can I use regulat hot water if I don’t have access to the ass water?
Nope. It has to come straight from the starfish
Ass water can easily made yourself. No need to get expensive store bought ass water
Yeah but KFC or Jack in the box isn’t as cheap as it used to be, the only cheap way to make it requires Taco bell now.
Instructions unclear, bowl still stuck to plate, but is now covered in sexy posterior dihydrogen monoxide.
Why does he need to rob the hot water first?
It had it coming
My water is too bougie and I can’t morally exploit it into poverty… Elevated plate it is.
By “ravioli bowl,” do you mean it currently has ravioli in it? If so, put it in the microwave for increments of like 30 seconds.
The power of suction is physically limited. That means it either isn’t suction or op is crazy weak. My guess is that the plastic melted (probably not from boiling Temp) or op is strongly exaggerating.
yeah it’s probably electromagnetic force holding it on there or something
It’s God.
Could god microwave a ravioli bowl so hot even he couldn’t pry the plate off the top?
Take that Christians
That stuck bowl of ravioli is slowly forming the next dominant species.
How can an ace be one and eleven? What kind of god would do that?
That bowl and plate are all that keep this reality going
How do you figure suction is very limited? You’ve never tried to pull a suction cup straight off, have you? I’m not talking about when suction cups have bad sealing surfaces and slowly leak to the point of popping off or peeling suction cups off from a corner, I’m talking applying it to a good surface and then yanking it.
A shoddy 4.5" suction cup from Harbor Freight is rated at 80lbs carrying capacity for glass, which happens to likely be the same material as the dish (corelle), judging form the thinness. The bowl is probably plastic and had weight on it while these were hot and wet after washing. Please, let me know if you can lift an 80lb dumbell from the end with a single hand with ease.
The difference between ambient pressure and inner pressure is always smaller than ambient pressure. Delta p is therefore limited. The force comes from Delta p times contact area which is constant.
I sadly don’t know your units of mass but as I said a perfect vacuum over an area such as the Bowl is as strong as a muscle. The Ravioli will in no world produce a strong vacuum so muscle will win in most cases.
Here, I’ll do metric for you on your theory of muscle being equivalent perfect vacuum. I have some similar corelle dishes. The flat measures 10cm across. That’s 78. 5cm^2 area. Assuming OP lives at sea level, 1atm is 1.033kg/cm^2 which puts the total force at over 81kg. This bowl offers no horizontal surfaces to hook fingers under to utilize geometric advantages and is instead entirely dependent on friciton. If your fingertips can squeeze sideways with enough force to pull a smooth, tapered 81kg object without glue, there’s a gold bar in a Dubai mall with your name on it.
4 inches diameter, 12.6in^2, 180lbs for the Americans.
At some point between 0 and 81kg of force, I’d start worrying about breaking the plate with such little support around the rim. And, as for the impossibility of a perfect vacuum, I’d be easily convinced the bowl could have more than half of the maximum possible pressure differential. A large portion of the interior volume is probably ravioli, minimizing the gas volume. Ravioli are full of water, which means the remainder of gaseous volume in the bowl was probably mostly steam, pushing out the standard air. Steam has an insane compression ratio as it cools and condenses back into water, at about 1700:1. Go watch the video of a tank car imploding from steam condensation.
I cover my bowls the same way. I always cock the plate to the side for this exact reason. My 1L (4 cup) pyrex bowls with silicone lids can cave 1" if they’re allowed to cool for a minute. Steam easily vents from the rim as it’s produced but once it starts cooling, the weight of the lid or plate is plenty to get the initial seal
@FreeBeard separates evacuated Magdeburger hemispheres by hand.
/s
These are 50 cm wide half spheres. If you find that comparable to the situation in the picture your appetite must be enormous.
Rough guess works be 20cm diameter, so 16% of the force required.
And as opposed to the Magdebutger hemispheres, these objects don’t come with handles for good grip.
it’s a bowl, it’s like trying to pick up a gold bar, how are you meant to get ANY leverage on it without using a knife or something?
Pick which one to save and which one to sacrifice. Smash the sacrifice with a hammer to free the other, break them both and realize this is just so like you and every single thing you try to do starts with a half baked plan, then goes off the rails and ruins everything until you’ve nothing to do but pick up the pieces.
I’m the kind of person who reads step 1, does it, and then goes on to read step 2. I’m happy I’m not OP.
The mildlyinfuriating part is that OP hasn’t posted a resolution.
Hey, if you’re using the hot bowl trick, make sure you pay attention to it; if you leave it to get hot and forget, it will be even harder to unstick it because the escaping hot air inside will make a partial vacuum when it cools down.
an hour of prying
After that much work you should leave is as-is on your coffee table as an art/conversation piece.
deleted by creator
I also think heating everything up is the smoothest solution. But to offer an alternative, I’d use dental floss to get in between the bowl and plate. If the bowl has slightly rounded edges (I believe it will), it won’t be too hard to get floss in. With the floss you’ll get inevitably some air in… Which will equalise the pressure and break the vacuum.
As an inferior alternative to floss, fishing line could work for this approach as well.
Can also use knife
I feel like this would cause a mild explosion. Not based on any real science, i just imagine that if it’s stuck that good there’s gonna be a more-than-satisfying pop when those finally separate, lol
That said, i really like your solution ✨
Implosion and very very mild, but technically yes
