You must log in or register to comment.
There’s a third, where the first person puts on thingiverse and we do it for fun without owning the actual unit
Isn’t that just selling?
China mastered copying things well. A five pack of replacement knobs that actually match is $34 on Amazon. A crappy homemade knob for a $4000+ range is crazy.
China has also mastered modern slave labor. That someone makes thier own replacement instead of ordering some small uncomplicated part from across the globe isn’t crazy, it’s self-reliant and smart.
But that’s, like, just my opinion man.
Oh I would go for the OEM part ten times out of ten, especially for such a nice appliance. Instead this person opted to make some plastic waste that will eventually be in the Ocean after we are all long dead.
Completely agree that Amazon garbage is terrible for humanity
So one is creative and solution seeking and now proud about himself and an inspiration to others and the other one – not, but just a thief.
If the knob on your stove breaks while it’s still new enough to be sold on the floor of a Home Depot? Yeah, the theft wasn’t by the guy who took the knob.
If the knob of your new-bought stovebreaks to talk to the seller or the manufacturer and request a new knob if it was a manufacturing problem. You don’t go around and steal knobs from innocents.
Home Depot is not innocent.
-Anti-union
-Massive donation and lobbying efforts to Republicans and Democrats (but they definitely go harder with Republicans, if you look at the numbers, and they’ve donated specifically to white supremacist candidates)
-Underpaid employees
-Violated the National Labor Relations Act NLRA
Fuck 'em
Just a thief?? That’s creative, solution seeking, and ecologically conscious problem solving right there
Ecologically conscious would have been getting it from some shop that fixes and recycles appliances.
Those stopped existing when it became cheaper to just throw the whole thing out and buy a new one
He’s an active initiator of the broken windows theory and thus not only a thief but acting anti-social by destroying virtues and morale and thus social safety, coherency and teamspirit. He’s a selfish sociopath.
Broken Window Theory is a load of bollocks: https://cssh.northeastern.edu/sccj/2019/05/21/researchers-debunk-broken-windows-theory-after-35-years/
He’s a selfish sociopath
Sure, being a thief is bad, but one case of theft doesn’t instantly make him a CEO.
Yes, he’s just a thief. The ends don’t justify the means. I can’t believe that needs to even be said.
Shoplifting is a noble crime.
That’s a humongous oven, must be a 10+ person household.
I ended up with 8 hobs, 2 ovens, a grill, and a drawer on mine. It was there when I moved in, and I kept it. Damn thing is built like a tank.
I’ve never had to use more than 2 of the hobs at once.
I use one of the ovens for storing rarely used pans and things.
That sounds like the 48" Miele. If so, hang on to it. That son of a bitch currently retails for $17,599.
No, that is not a typo.
Not as fancy as that unfortunately.
It’s 100cm across and the branding has long since worn away. I think it used to say Panache on it at one point, but I can’t find anything about that brand online. Following a trail of spares that look like the stuff on it, it was possibly made by Newhome.
I’d take a picture but I’ve not cleaned it in ages so it looks like something out of a crack den.
And yet it runs with gas, as if we’re still cavemen cooking meat over open fires.
Its the cheapest ¯\_(ツ) _/¯
Or its the house people designated as the holiday house, maybe! Only actually used fully a few times a year.
That’s my house. We have dual ovens and use them simultaneously several times a year, mostly holidays.
90cm.
We have one for our 4 adult, 2 kid household. Its amazing how often it’s not big enough for all sorts of things.
I think 2 X 60cm ovens make more sense in hindsight and they also dont take as long to heat up
My oven is so old I came across an identical one in an e-waste pile behind a store. I stole the timer knob and mechanism so I don’t need to keep using the broken one (manual only) anymore.
You didn’t steal it, you 💫recycled💫.
*Reused, which is preferred to recycling even if the materials are 100% recyclable.
That’s what I told to the store employee I encountered coming to work via the back door. He wasn’t too happy but ultimately let me do it.
Imaging being mad someone is taking your trash.
Thats going to be a squidgy mess after a long cooking session. Hope he doesn’t get plastic burns.
I think something might be wrong with your oven uh… my knobs don’t get anywhere near the glass point of PLA when I’m cooking something.
I’ve always got a spool of high temperature PLA for that, good for up to 140°C.
I don’t have a setup for ABS/ASA and been looking for affordable HT alternatives. Not sure how I haven’t heard about this.
2.5x the price of PLA where i am, but not like I have better options on hand.2.5x the price of PLA where i am
Yep, I usually print drafts in normal PLA and only the final part in the high temp stuff, but 2.5x is often still better than buying something if there’s even a solution available. So, fine for me in edge cases.
When an artificer and a rouge are faced with the same problem.
Edit: my english sucks
What does makeup have to do with this?
Rogue is not spelled rouge.
I think you replied to the wrong person. They know.
DM: Roll a D20 for a stealth check.
Rouge: I bat my eyelashes.
DM: Huh, I misread your character sheet. I’ll allow it.*eyeliner
I feel like an artificer would be skilled in the application of rouge. As well as foundation and eyeliner.
I’d eyeball the measurements in Blender and laugh at my crooked knob every time I use the stove.
You’re still putting too much work into this. Just heat up the metal shaft where the knob was with a torch and press any old hunk of thermo plastic onto it. Now you have janky done even more quick and cheap.
I laugh at my crooked knob all the time.
What about the old vice grips that are now a permanent part of the stove trick?
Nothing is more permanent than a temporary fix.
Man, all the sinks I’ve seen over the years with vice grip knobs haha.
Channel locks, adjustable wrench, or plyers are also acceptable. Plus then ya know damned well where they are.
This is why I always buy cheap vice grips whenever I see them in a box of tools at an estate sale or something.
“Oops, I broke a handle on (thing).”
Clamps vice grips on the bit left over
“Fixed it.”
Right now both of the seats in my truck just have a vice grips for the reclining lever.
I had my shower knobs as vice grips for a long while
I simply pulled the knob off in the store & shoved the rest of the stove up my butt, later at home I printed the missing knob. It’s a simple life-hack, basically everyone is doing it.
Is this why your meatloaf always smells funky?
Me too I enjoy putting my meatloaf in Evil_Shruberry oven
It brings all the funky people to the yard tho
I hate that as a society it is somehow ok to steal for your convenience. Its the same thing with lots of other things as well. Don’t you just love it when you buy a product only to get home and find half of it was stolen?
You mean like US healthcare insurance?
Still cheaper than getting a 3D printer and filament and stuff. And CAD/CAM software.
The type of person to do this most likely already has a 3d printer, and cad software is free for personal use. The electricity and filament cost for this part would be a few cents and it would take minutes to print on modern printers
Even if you didn’t have a 3d printer it would be significantly cheaper to use a 3d printing service to order the part, than to buy OEM replacement knob
Also a high probability they have a 3D printer and are super excited for something useful to do with it.
It’s true that you should not expect to save money in the short or long run with 3d printing as a hobby, but if it’s your thing then it’s nice to have a hobby that’s occasionally useful. Also, autodesk fusion is free for consumer use.
I wouldn’t say I’ve made back my investment on 3D printing in the past half a decade I’ve done it. But in terms of “prints for friends” like this one above I may be close. Plus there’s just something nice about going “I need a measuring cup for dog food” and printing one to the exact serving size.
What food-safe printing materials do you use?
I just use PLA. PLA itself is good safe, but occasionally the additives aren’t, so I don’t use any for human related stuff. It’s also worth considering that the layered approach can allow for bacterial growth, so unless you treat it (e.g. epoxy seal it), you’ll need to wash it fairly frequently to curb buildup.
That frequent washing is what leaks out the nasty chemicals from the plastic fyi. Heat and mechanical stress are the main way plastics leach
To be fair, that’s the case with pretty much all plastics.
Tupperware shouldn’t be used to reheat food in the microwave for the same reason, yet that’s it’s most common use generally.
Untreated PLA is more brittle than commercial food-safe plastics though, that is true.
If you do not have a 3D printer and CAD software, you are 100% right.
If you already have those things like OP, then why not just design / print one? I am also a 3D printer / CAD person, and I love designing replacement parts that are wither too expensive, or often impossible to find. Mostly though, I design and print things that make my and my families lives easier / nicer / more convenient. And they are customized to the exact item and function, something that you would most likely never be able to get in a store or online.
Stove Knob guards. https://www.printables.com/model/278668-stove-knob-guard
Salt / Pepper Grinder Holder. https://www.printables.com/model/155219-salt-and-pepper-grinder-caddy
Spice Jar Organizer. https://www.printables.com/model/151171-spice-jar-spacer-organizer
Just to name a few things.
Software is free if you aren’t using it for commercial use. Fusion 360, onshape, etc. are all free for personal use. And that’s assuming someone didn’t make it already and share it free.
Filament costs $17 for 1kg of perfectly fine plastic. You’d probably use 100g at most for this, so $1.70.
A Bambu A1 mini is $200, and is a modern, high quality printer that would be fine for this project.
So you only need like a half dozen of these projects to come out ahead.
To be clear, I’m the last one to say one shouldn’t invest in money saving innovation. But the breaking even should be number one priority. I, for instance have all kinds of energy savers in my house that have cost me several hundreds. They’ll only be returned in a few years and I need to manage them properly.
One doesn’t buy a 3D printer to make a knob. One is suddenly presented with a need for a knob (or a thingy, or a flangle, or a twizzlet…) and suddenly remembers, “hey - I have a 3D printer.” Followed by “I wonder if there are any matching designs in one of the several massive free databases of models.”
Followed by getting out the calipers and opening OpenSCAD
The two types of players
Edit: Here have a funny youtube video I reminded myself of https://youtu.be/CJpsL3XbD-M
I wish I had pockets big enough to replace the flimsy Bosch drawers in my fridge that start to shatter as soon as you pull just a tiny bit harder than normal.
There are 3d models for some fridge drawers. I have a Frigidaire with similarly flimsy drawers and found a model for them.
