This is not a coincidence, Apple purposefully make it painful to use anything with any of their products unless it’s one of their products
For W10, you install an app to get the codec, then you’re done. It’s built in on W11. Same as HEVC video which is used very commonly in piracy. Are pirates out to make it “purposefully painful” or are they just using modern codecs? Android also can save to HEIC or AVIF.
Yeah it’s a bit of a tossup between them. Apple definitely chose it to be a dick. However, Microsoft could rectify it easily if they wanted to.
Both HEVC and HEIC thought cost money, and the vast majority of windows users will never use the codecs. Including the license with every copy of Windows is added cost to the end user that they receive no benefit from, so I understand why they would leave it out. HEVC prompts you if you try to play to go to the store and buy the license, which is good for your entire account. Honestly it’s not a terrible thing to do. I was one of the 1% of people who would play HEVC natively on Windows, so yeah the $3 license made sense
Apple definitely chose it to be a dick.
What other image format supports HDR and modern compression algorithms? AVIF also requires a special codec. This is just codec stuff, I really don’t see it as anyone being a dick. Android can also use these modern formats, with the same requirements if you want to open them on Windows.
Kinda surprising to me that people so frequently recommend using Linux here, yet taking 30 seconds to install a free codec on Windows is apparently a big deal.
I literally said it was easy to do.
Let’s try this again: in a world where Apple is not a dick, what modern image format do they use that isn’t subject to these same codec requirements?
If they were doing this just to be dicks, they’d spin off one of their own formats like they did with ALAC. They didn’t, they used HEIC which was also used by Android (which is now using AVIF).
Get yer logic out of here
Answer the question
What other image format supports HDR and modern compression algorithms that don’t require a license?
There, ftfy. You answer the question.
I dunno, JPEG XT maybe? At a loss here.
Why did Android also use HEIC, did they choose this just to be a dick like Apple?
- are you implying that there is indeed no better choice?
- webp, but that’s google. jpeg xt, but i see virtually no one adopting that.
OpenEXR. Though it probably could use a spec upgrade, in particular add JPEG-XL to the list of compression algorithms. It’s not like OpenEXR’s choices are bad, the lossy ones are just more geared towards fidelity than space savings, kind of the opposite of what you want for the web where saving space is often paramount and fidelity a bonus.
Bonus: Supports multi-channel, so not just RGBA. Not terribly useful for your run off the mill camera, very useful in production where you might want to attach the depth buffer, cryptomatte etc and I guess you could also use it for the output of light field cameras. Oh there’s also multi-view so you can store not just stereo images but also whole all-around captures and stuff. There’s practically nothing pixel-related you can’t do with it though it might require custom tooling.
Here’s the free oem app as an msix package as Microsoft removed the store link. link
(yes I did accidentally upload it to the wrong collection, but I don’t think I can change that)
Yea … no, sorry to say but this one’s on Microsoft. I get it, hurr durr Apple expensive and elitist, but they know where to put up their walled garden and where not to. For example they used to have their own video container .mov but they’re way past forcing something like that onto iPhone users. And even back then, the actual codec they committed themselves to in those days was H.264, a standard that’s open to adoption by anybody. You can easily turn an old .mov into an .mp4 or .mkv without needing to alter the actual content of the file and that content is playable by pretty much every media device built in the last 15+ years.
HEIC isn’t Apple’s thing it’s from the MPEGroup, also easily licensable by anybody. I guess the reason why it wasn’t part of Windows 10 from the beginning is because they both came out in mid 2015. Windows 10 seems to have adopted it for viewing (and later editing) in 2018 but they make you hit a stupid download button in their store to get it so that’s lame.
Yep. Lack of format support is usually to blame on the one who doesn’t support the format. You can absolutely blame Apple for this too though, their apps can’t open e.g. Matroska video or FLAC.
And perplexingly, they don’t support uploading HEIC, their own image format of choice, on the web iCloud Photos. So there’s that too.
(At this point my music library is stored as ALAC because it’s well supported in both Linux and Apple’s OSes. Really wish it wouldn’t have to be that way though. Someone needs to tell them about ffmpeg.)
For example they used to have their own video container .mov
It’s always very very funny every time someone mentions MOV, because while it’s very similar to MP4, it’s actually an open format while MP4 isn’t (!). You actually have to pay for the MP4 standard document while Apple just gives you the MOV documentation.
Also at least taking a screen capture on macOS still gives you a MOV container, actually.
Apple made ALAC as an alternative to FLAC due to the dubious licensing around FLAC at the time.
well there ain’t no more licensing issues now are there
Yes they are no longer scared of the licensing enough most modern Apple devices do have at least some FLAC support.
Also ALAC is a free and open source codec which also has wide support.
And with a tool like FFMPEG you can easily convert between the two and they are both lossless so there is no data lost in the conversion.
So really just use whichever you like it really doesn’t matter.
since you seem to be knowledgeable about this, i wanna ask: do you think one should use .opus or .ogg as the file extension for OPUS files?
I think both work since opus is the codec but ogg is the container, but personally I’d probably go with .opus because it’s more descriptive.
Btw Apple’s ALAC and AAC files are typically stored in an mp4 container but with the m4a extension to mark it as intended to be audio only (although it may have a video track, which usually is used for album art).
Interesting. I can’t find anything about the FLAC licensing issues. Do you have a link?
(Also, correction — Wikipedia says macOS in general can play FLAC. I guess it’s just the Music app that can’t import them.)
I’m really not sure where I originally read it. I did some digging and I found some discussion about FLAC and patent trolls on a few forums, including the Talk page of the Wikipedia article, but I haven’t found anything concrete.
It might be that the patent troll thing was just a rumor!
Ah, alright. Thanks for looking!
I wouldn’t even know how to hold a local music library on macOS these days. The app that used to be iTunes is now just called Music right? It’s way confusing for me but I also don’t daily drive the OS anymore. I have my stagnant library in Subsonic which in itself is a stagnant product but you know how it is with Spotify these days.
I didn’t know MOV has a more accessible license than MP4 but yea MP4 in itself is hardly what one ever wanted to hold their content in. All I know about MOV is that back in the XP days obviously Windows couldn’t play them out of the box. Not that WMV (lol) was any more desirable. I guess most of my stuff back then was AVI.
I wouldn’t even know how to hold a local music library on macOS these days. The app that used to be iTunes is now just called Music right?
Yeah. I have a local library consisting of some albums I bought, some which aren’t on streaming services, and some other stuff such as game soundtracks + also use Apple Music streaming. They complement each other really well.
Do Apple still sell Music in that app?
They do actually, the iTunes store still exists. I haven’t used it though since while it’s DRM free at this point, it’s not lossless.
HEIC is a much better-compressed format than JPEG that all Androids support; iirc JPEG XL (kinda dead) and Google’s WebP are the only other big-name formats with better photographic compression. Windows was the only major operating system that chose to have consumers separately pay the patent fee, none of which goes to Apple. Since Windows 11 22H2, HEIC images work out-of-the-box.
Better-compressed in saved Mbytes, but comparing images, that compression somehow looks more…fake. Hard to describe how.
This is not an Apple thing. Android phones use HEIC by default as well. This is a good thing. HEIC uses smaller file sizes and has fewer artifacts than JPEG.
I just plug a cable from my iPhone to my Linux mint laptop and view/transfer what photos I want through my file browser… seems real easy.
You could use KDE Connect and do it wirelessly as well. Who needs cables for anything but charging these days?
I use the cable to charge my phone. Am I the only person still doing this?
I was mostly joking, but KDE Connect has made phone-to-PC transfers much more convenient for me. I’ve only tried it between Android and Linux, but once connected, it basically nounts my phone as a drive that I can browse or copy/paste to and from.
Generally, I only use a cable to charge, and I rarely need/want to transfer files at the same time as I want to charge.
That looks pretty good - might investigate if I can use it without WiFi, i.e. just using mobile data.
I’m a bit weird as I’ve never had any IT training but have been using all types of computers for about 40-ish years. Back in the day I had a psion 5mx running epoc OS. To transfer a Word (Not to be confused with MS’s Word) file I had to convert it to .txt or .rtf and then save it to a compact flash 8mb memory card. Remove that card from the psion, plug in the CF card reader to my iBook (dual boot OS 9.1.2 and Mac OS X) and import the text. For some reason these files were always read only so then you open a new Jotter file and copy and paste the text over. Absolute ballache. Easy file transfer is a holy grail of digital living.
I learned of KDE Connect on here a couple months ago. I don’t use it a ton, but it’s really convenient for a few things. File transfers are easy, and you can send your clipboard between devices. That’s been useful for when I’m communicating with someone on my phone, I can look stuff up on my PC and share URLs easily.
Thanks for all that info and the recommendation. I’ll give it a go.
Someone tried to send me a picture they took and it looked like hot garbage until they sent it over email. Not because it couldn’t be sent without feeding it through a potato first, because Apple wants a worse experience for anyone not in their ecosystem.
When they are the oddball in the group though, it just makes iPhone’s look like a worse option.
However, they still forget that working with their products is the worst pain in the arse.
Leaving aside that this one is Microsoft’s fault, how is it painful? Do you even have an iPhone? And if so, how often do you move images to your PC from it, without those images going through an intermediary service?
Same thing with the M4A music format. My Mac struggles to read MP3s in most programs (other than Preview). I have to convert them to M4A if I want to import them anywhere.
Preview does not play MP3 or AAC.
And what’s a program that’s not accepting of MP3 files that generally works with audio?
You seem to be a bit confused.
I don’t think you understood my comment. My Mac just hates mp3s. Programs like Audacity and Audio Timeliner always struggle with them unless I convert them to m4a first. Never was an issue on Windows. Preview will play them but that’s about the only program that doesn’t hate them.
Preview is an app on macOS for viewing and editing images and PDFs.
According to the Audacity manual it supports MP3. But you need to install additional software for AAC (M4A).
https://manual.audacityteam.org/man/importing_audio.html
So it’s strange that you are struggling with this. It seems something more is going on here…
Also, just in case it was confusing: M4A is just a file extension used to indicate AAC audio in an MP4 container.
That’s a bummer that AudioTimeliner is struggling with MP3 files. Small independent apps like this usually depend on outside libraries to play back audio. And looking at the version history, it looks like the author has had to make multiple updates to fix playback support over the years.
I see that AudioTimeliner is niche software that has been around for about 22 years, and it’s cross platform. It seems normal to me that it would be picky. Audacity on the other hand, something weird is going on.
I work in higher education, so I understand how relying on niche software like AudioTimeliner goes. I’m sympathetic.
But there is a lack of precision in what you are describing, and your symptoms are directly counter to the Audacity documentation.
As much as I love to hate on apple, any of this format shit is 100% Windows bullshit. It’s not just pictures, with shit like webm, or some random video codecs it’ll ask you to FUCKING BUY! But even shit like Windows only supporting some like 3 file formats from the god knows how many out there. Ever since I switched to Linux (heck, even fucking MacOS would do better) all this stopped being an issue. Fuck windows for literally only supporting their special selection of formats. There’s a good reason why the first step of many people installing windows is also Installing VLC or MUCH superior image viewers. Because Microsoft chooses to not support most things out there!
Exactly. Android’s default image format is HEIC as well. Jpeg is outdated and needs to die already.
And today I learned that HEIC is not a proprietary Apple format
Classic jpeg still has value and there’s improved revisions.
I had my phone taking photos in HEIC for a couple months. i ended up switching back to .JPG because both signal and whatsapp stuggled with it
Windows now supports other formats than BMP. It’s already a huge progress.
They started to support svg (which is 23 years old by now) in Office a month or so ago. What a time to be alive!
Obviously, they wanted to get it just right.
We even got GIF! Now that it’s starting to show its age.
PCX 😒
How many distros support h264/265 out of the box? They probably don’t support most HEIC images either since they’re HEVC on the inside
Almost all of them? They may prompt you to install additional codecs but thats it. Most software displaying images support thoose image formats. Man we have vlc to display any format
That’s exactly the same case as Windows. The built-in photo/video players don’t support them out of the box, but do if you install the free codec from the store, or you can install any 3rd party players you like.
There are lots of great things about Linux, but out of the box support for licensed video codecs isn’t magically better than Windows
I am talking about the prompting “on install”. Its just add on install and everything works. That sounds like out of the box support for me
Imageglass, be chill
GIMP opens HEIC and WEBP files and it’s available on all operating systems.
I can use HEIC on Arch (btw) just fine. As I recall there’s some bullshit you need to download on the Microsoft store to get it to work. It’s a pain in the ass.
You can change this in Settings > Camera > Formats > choose Most Compatible to change from HEIF/HEVC to JPEG/H.264
EDIT: I use XnViewMP to browse photos and it can convert HEIC to JPG and HandBrake can handle HEVC to MP4 or MKV.
It becomes a problem if you didn’t take the photos.
Ffmpeg
Not sure if it works for HEIC, but here’s a tip for converting WEBP (common on websites) to a more universal format like PNG:
1: open Paint
2: open .WEBP in paint
3: save as -> PNG
4: give name and saveThere’s also a Firefox extension that I use that that lets you just save as PNG https://addons.mozilla.org/en-US/firefox/addon/save-webp-as-png-or-jpeg/
Or even better, use ImageMagick.
Possibly Linux?
This is a work problem and a lot of software we use isn’t supported on Linux.
Possibly?
At minimum, we would need AutoCAD, Microstation, and Projectwise. We also need these exact programs as our clients require our CAD submittals to be in specific formats.
We also need Bluebeam Revu for other client coordination.
Thanks for the serious reply but I was just doing the “username checks out” thing
My username is possibly Linux so sometimes I just reply to random posts with possible linux as a joke.
I know, but my response sparked further discussion so it’s cool.
AutoCAD
It’s always funny with 3d. Graphics? You need Houdini? Of course it runs on Linux, it’s a UNIX-native program after all, first version ran on IRIX because what else would you use for 3d work but an SGI workstation and Linux is the commercial successor to IRIX. Blender, the same, just 5k bucks cheaper (and not everything is nodes, not yet). CAD? Everything’s suddenly windows-only because… how the hell did that came to be? Were they running 1990’s CAD software on Excel machines?
Neither Autodesk nor Bentley had a good economic reason to develop in Linux. Those companies also spend a lot of money on major clients to produce tools for them, which they then force all contractors to use.
I mean back in the days they should have been running on IRIX, and SGI switched over to Linux when they made the switch to x86 CPUs. Plenty of movie studios switched over to Linux workstations because of that, porting from IRIX to Linux is trivial compared to porting to Windows, why didn’t the same happen with CAD?
Wintel-PCs for the longest time just weren’t suitable for 3d work, they were office machines.
Both programs were developed to work on high end consumer laptops, which meant being able to work on IBM PC and therefore DOS.
Those programs also were likely 2D in their initial versions in the 1980’s. They were also competing against human drafting, which was considered to be industry standard at the time.
Cost and ease of use were likely more important than other potential users of 3D software, so they went with DOS and made the transition to Windows.
Not the time, not the place. As a Linux user seriously no, just no. People like you are the reason Linux users are seen as unhelpful and toxic, this is a codec issue not an OS issue.
Read my username
It is for the memes
Hmm, maybe they should try Linux then. Solve both the codec and the OS problem.
Have you got compatibility turned on in the photos app?
I didn’t take the photos.
deleted by creator
I considered that, but it’s a paid app - yes it’s only a token amount (99p in UK, ymmv) but just as a point of principal, am I fuck paying extra just to be able to open some photos.
I was referring to “HEVC Video Extensions from Device Manufacturer”, which was free, but I just learned that it was taken down a year ago.
Ah, that’s a shame. Thanks anyway though :-)
deleted by creator
I use an open source video codec library in Windows 10 but I’m away from my computer for a while and cannot tell you.
Yeah I hate this too - one of my clients regularly supplies images as HEIC files and they are always crappy to work with. Plus the images just seem much lower quality, which is a problem when they are being used for professional purposes.
It’s your imagination.
Maybe they’re doing something else to their files then, but seriously they are grainy as hell.
It might be something wrong with the camera or phone they used, but the format is solid.
Maybe, although it’s multiple people, so seems like it wouldn’t be a camera fault.
Possibly it’s how they are getting to me - I don’t get them directly, they come to via someone else, and I think the someone else may be getting them via WhatsApp (which I don’t use).
So in fact it’s maybe the compression from WA, rather than an issue with HEIC? I should have thought of that before!
I’m sure you don’t need telling, but just in case, I would check the meta data to see when the last time the file was edited. If it matches when they sent it to you, that’s the cause.
Ah, good shout, thanks I’ll do that 👍
Becoming a default to have it installed in Windows. On a personal machine, it’s easy to fix. In our work environment, we just made sure it’s on the image by default. You can also circumvent a windows store block by installing appx stuff in Powershell.
How many browsers open it natively?
Only Safari.
Here’s $0 kid, buy yourself a better operating system. All the others come with HEIC support.
Get work to implement it.
You just have to get them to support a free image viewer that also supports HEIC, not impossible.
