Men - you are thin therefore we don’t make pants long enough for you
Solve this annoying issue by becoming fat and wearing shorts all the time.
The opposite issue for me: Big ass, big thighs, short legs.
I’ve given up and now I tend to just buy women’s pants.
That is better than the opposite. You can have your pants hemmed and taken in where required. It is harder to add material.
I feel like people these days don’t utilize tailors enough. You can improve a lot of off the rack clothing.
Yeah I think you’re right, I have more options to go for. But still, to have standard leg sizes…
But… but women’s pants don’t have any room in the crotch.
Doesn’t seem to be a problem for OP. 😜
Skill issue tbh
Yeah, I’ve had that problem. One of the nice things about Reddit was r/tallfashion – acc had links to stuff with decent waist and inside leg. Have found some women’s trousers pretty good for that too.
But women’s pants are cut for people that don’t have genitals sticking out of their crotches. How do you avoid uncomfortable smashing?
Pick ones with a loose fit haha. There are plenty around.
Easy, have a small peepee.
Women’s pants are also bad about that. I was underweight from stress during my breakup and most women’s tall sizes start at a “6” which is like a men’s 32, more or less. I was not that big at that point. And to make matters worse, many of the allegedly tall pants just have a longer inseam and are not longer in the rise, as though all difference in height is just legs.
Gap makes tall men’s (I just checked and they go down to 32"waist and have 36" inseam and right now the slim fit is so, so cheap in price) and women’s pants, they actually do make them tall not just longer inseam. I am not tall enough for their tall pants but get the best fit by buying tall and hemming them, because standard fit (to the extent it even exists in women’s clothing) is wedgie city, not long enough. They also make tall shorts, which is amazing,they actually fit.
It’s pretty annoying when I go to the clothing store, or Costco, or whatever, and everything is like size 46+ waist. I’m not sure if that’s all that is left because all of the average sizes were sold out, or if that’s the average size so they have a lot of them. Looking around at my fellow shoppers I think it’s the former, but again, I’m not sure.
They’re there, you just don’t see them. :)
What? I’m not slim, neither fat, I’m about average dude, but I rarely ever find pants that aren’t too long. Maybe it’s EU thing, but nearly every time I put on regular pants I feel like a scuba diver with the excesive pants as “fins”. Last pants I bought “short” version and I’d still need about inch shorter…
Eat more then be a fatty like you’re clearly supposed to be.
And the back pockets are always sewn shut on anything not jeans.
Ok, why the fuck are pockets sewn shut at all??? I’m a guy and I see clothes like this too. It pisses me off so much, it was so close to being useful, most of a pocket is already there, why would they just give up?
I think the real reason is so that the pockets dont get snagged or deformed while a product is being transported / stored / displayed prior to being sold.
fake pockets look nice. If you need functional ones, just pop the stitching. Usually, the stitching keeping the pocket closed is very weak compared to normal seams.
+1 for the life hack and restoring some faith in humanity.
This isn’t a life hack. Pockets are intentionally sewn shut for the manufacturing and shipping process. You are supposed to open them when you buy them.
Except they’re not fake. My girlfriend has several pairs of work pants with actual real pockets that have just the opening sewn shut so you can’t use them. Why, just why?
Have you even read the comment you are replying to?
No I have ADHD.
Of you open them is it just butt or is there a hidden pocket?
You can easily answer this question yourself by looking inside/turning the pants inside out.
Tried this and the lady said she’s pressing charges. Thanks for nothing.
I guess you’re just not charismatic enough.
It’s an actual pocket but I didn’t find this out until I was an adult - I thought that’s how they were made for a reason and if I cut the thread, it would make a hole in the pants. Nope, regular pockets just sewn shut for some reason.
I think I was in my 30’s before someone told me the truth. It was a man IIRC lol…but yeah my mom never knew I guess, friends at school, etc, or if they did they didn’t tell me because I guess they never noticed.
Probably for tax purposes.
Things will only have useful size metrics when the buyers want useful size metrics.
Men’s pants come with useful size metrics because they’re useful and we attach very little meaning to the measurement of men’s pants.
Women’s pants come with stupid size metrics because we attach a lot of meaning to the measurement of women’s pants.
It’s the same reason condoms sizes are all on the spectrum of large to extra large without actually providing a length and diameter.
When was the last time you measured your waist and then tried on a pair of pants?
Men’s clothing has tones of vanity sizing these days.
The cuts of fabric are cut with dies. A layer of fabric is place down and a press presses the cutting die down to cut out the shape. A cheap manufacturer over stacks how many sheets are cut at ones. Top layer is going to be bigger then the bottom layer.
I expect there is much more hand cutting going on than you realize. To have multiple styles and different cuts would require giant warehouses of dies. Those aren’t cheap and wouldn’t last long in a production environment. Any change would require a new die. The machine shop would need to be as big as the cut sew shop.
One skilled (or trained) operator can change from pants to shirts on a whim. You’ll notice almost all clothing is made in far off places where labour is cheap. Not to say there isn’t die cut stuff, but overwhelmingly the textile industry is hand made.
These things are how multiple layers of fabric gets cut.
Surprisingly CNC cutting machines are becoming more common even in places where labor is “cheap”. The technology is becoming affordable and reliable enough to replace even underpaid workers as a “cost saving” measure.
Here’s the garment cutting department at a factory in Pakistan.
I once bought a used 80 ton hydraulic press from Levi’s. It was used to cut blue jeans, cotton fabric dust everywhere in it. It used maple plywood and die rule cutting dies that could produce 1000’s of jeans pieces a day, (polyester/cotton fabrics are a bitch to cut). The dies could be swapped in a few minutes and rebuilt in about an hour with simple tools. The cost of the dies were about $1000 US and could last up to a year.
Those hand operated cutters are fine for simple items made in small lots, but you want to make millions? They are useless.
*I rebuilt it to cut sandpaper discs and sheets using similar die rule dies that could cut 3000 to 4000 pieces per rebuild.
I can see that, way more likely than cutting dies with a press. It would be a huge cost savings as there would be way less material waste and no user fuck-ups.
For pants? At scale, the dies are cheap and probably can be reused across multiple styles within the same brand and size. The difference between blue jeans and cargo pants isn’t the cut. It’s the fabric and accessories.
A roll of fabric is 54" wide. It will get rolled out in layers as long as the table allows. Now we need a press that can press over the entire length of the table and the table that will support that and the aforementioned millwrights and machine shop. Or we need any table at all and a guy with a knife.
Not to say there aren’t things made with dies but Occam’s Razor and a career in textiles leads me to believe it’s not as common as you think.
The difference between blue jeans and cargo pants isn’t the cut. It’s the fabric and accessories.
This tells me you don’t know what you’re talking about.
You don’t layout your fabric on long table. You feed it from a 5000lbs roll with an automatic indexer and then die cut it. One operator can do the job start to finish. (Been there done that as a toolmaker who made some pattern die rule dies for Levi’s and then bought and rebuilt an 80 ton hydraulic press from them that had whacked out blue jeans every day for 20 years and rebuilt it to cut sandpaper discs for the next 15 years)
The CNC cutter is valuable for a company that does custom cutting work for outside customers rather than for in-house work. Fast to make changes with minimal setups. But prepping the material to feed the machine is more labor intensive.
I was friends with a lady who worked at a dress shirt factory. She ran the bolt back and forth on a carriage over a long table and the stack was cut by another guy with that knife I showed earlier. I imagine it all depends what you’re making and what you’re making it out of whether you die cut or not. Fast fashion (which Levi’s aren’t) would not be die cut.
I make boat canvas and layout and cut by hot knife. The only efficiency I get is if something is symmetrical I cut both side at the same time.
It’s the same reason condoms sizes are all on the spectrum of large to extra large without actually providing a length and diameter.
In Germany the packaging indicates the [Edit:
diameterhalf circumference] in millimeters ±2mm tolerance. Because, you know, size matters here.
Half circumference? Why?
(Yeah I zoomed in. It’s 52mm, which is fractionally over 2 inches)
The literal translation of what’s on the box makes it easier to understand:
Width of the condom when laid flat: 52 mm
It’s simply the easiest width measure you can do yourself.
That isn’t equal to the “width” of your dick though. Diameter is closer.
I guess it doesn’t really matter if the measure is standard (though elasticity would also affect fit) so you “learn your size” once, but it doesn’t seem super useful to me.
Sure, but diameter is also harder to measure on something like a latex tube. Just measure the circumference, divide by 2, then measure the condom.
I’d personally prefer it to be the circumference (so double the condom width).
Just divide that number by pi.
Then you can reasonably approximate with a ruler over the top with no math.
Why not divide by tau and then again by 2? Tau is superior anyway.
So that thing is 4 inches across? Eek!
Edit: oh, you said “half circumference”. For some reason I thought that I read diameter.
It did read “diameter”. I remembered it wrong and corrected my mistake. Sorry for not highlighting the edit. I did so now.
Right on. I was going to feel pretty inadequate if there were enough guys walking around with soda cans between their legs to justify a market for 4" unstretrched diameter condoms.
Said someone who’s never shopped for men’s clothes.
I bought two pairs of jeans the other day, both exactly the same size, both the same style, but just different colors. The blank ones fit, the blue ones do not fit, explain that.
My personal theory is that each pair is manufactured in a different factory, and their tolerances are so ridiculously lacks that they can produce different products the same supposedly identical blueprint.
I bought two pairs of jeans the other day, both exactly the same size, both the same style, but just different colors. The blank ones fit, the blue ones do not fit, explain that.
I’ve experienced the same issue, not just with the waist but also the inseam!
G-Star jeans are notorious for this; same style (eg. 5620s), same fit (eg. Skinny), different colours but different colours: I can fit in the 33, and 32, but the 34 is too small currently (I put in a few kg).
Shoes really piss me off. I can wear wear anything from a size 11 to a 14 depending on the year, month, day, and hour of the day. I tried to buy a pair of slippers last winter. I tried on a pair clearly labeled ‘Size 14’ at the insistence of my Wife. I couldn’t get them even half ways on my foot…
The explanation I have always received in the store for this, is that some shoes have stretchier material than others and it’s up to the manufacturer whether they consider the shoe size to be the material unstretched or stretched. Seems like a daft allowance but there you go.
What’s the point in a non-standardized standard?
Ya it happens a lot with different colorways. Often the black one is different than the others as the dyeing process is different and can affect the shrinkage. They were likely the exact same size before they were dyed and poor QA processes allowed one to become way different afterwards.
i’ve had that happen with the exact same pair of pants before lol. same black slacks, same size waist and length, put on the same rack, and when i tried them on they fit totally different lmao
I’m normally a 33 (34 w/ belt; 33 in my length is unobtanium), but I just bought a 36 swimsuit that was still a bit tight (probably closer to a 32). There absolutely is a lot of variation here.
This is very true. Men’s pants are tagged with their waist size and will also normally have their leg length on the tag. I’ve got a fairly big belly so I have a large waist size compared to my height so this is useful.
Having to do the mental mathematics to consider which size I am or having to try on the clothes to get an understanding would be a major pain.
Nah. Mens pants sizes are just as wild and wrong as womens sizes.
Its vanity sizing, everywhere
I struggled to fit in a size 34 a while ago.
Slightly more expensive brand, I fit in 34 just fine. So in my mind I still have a 34" waist.
I do not.
I went to get a couple of pairs of jeans from a Plato’s closet recently. I tried 6 pairs of different brand jeans, all 34/32. 4 pairs didn’t clear my thighs, 1 couldn’t button, the last fit. The cut of the jeans makes those numbers mean very different things…
Cut is part of it, but they literally aren’t consistent about the length of the cloth, even with the same number shown.
“Boot cut” or “skinny” 34 waist from every single brand will differ, even if the cut was exactly the same.
I hate it
That is 100% not how mens sizes work.
It’s 50% of how men’s sizes work
I know this is anecdotal, but I’ve never had pants size be the same as my waist size, even when I was in good shape.
Then you must have the weirdest waist ever, for a man.
I am able to go out into any store with my current waist size, and get a good-fitting pair virtually every time without even trying it on. Now, I may not like certain styles - I prefer my belt to be at my bellybutton, not halfway down my hips such that any erection can only ever point down - but men’s sizes are remarkably consistent.
I thought that too, until I actually measured my waist because I needed to buy some hunting pants online. I’ve worn the same size Levi’s since I was 15 years old, and I figured that was my actual waist size. It’s not. Measure yourself and compare it to the waist size of your jeans. They don’t match up.
Are you measuring your waist or your hips? Counterintuitively the waist measurement is not where your trousers actually sit.
Try and find a 38" waist with a 36" inseam. Even in Tall and Big man stores they assume you have at least a 44" waist.
Try and find a 38" waist with a 36" inseam.
Then that is an availability of options issue, and not any kind of issue where manufactures label a pair of pants to be a 38 when it is really a completely different size.
I bought several pairs of shorts recently from the same brand, all the same waist size, and some definitely fit better than others. There are always manufacturing variances.
All the size 10s in the shop are the same size?
(X) Doubt.
Bullshit! I wear size 34 pants with a belt to keep them on and they are 36.25in around.
Yeah, I wear 33W pants but they measure 36" around the belt loops. This isn’t the result of vanity sizing, though - men used to wear pants that were very high-waisted, but as pants got lower over the decades they kept using the “nominal” waist measurement so that men would still know what size to buy, since the circumference around the hips (where most pants are cut today) is about 3"
lessmore than the circumference of what used to be the waist.Pleats are another useless holdover from the high-waisted era, as they made it easier for pants to expand down over the hips and thighs.
I don’t know, maybe your pants are half an inch thick, and you overlooked accounting for that
100% men’s clothing are vanity sized and it’s worked so well men didn’t notice.
you don’t wear your pants at your waist
Yeah, and there is no dimension on these pants that is 34 inches.
yes, because you measure at your waist but you don’t wear your pants at your waist
Unfortunately, that isn’t quite right for guys. Skinny, straight, relaxed…. All these types changes the fit and sizing. I wear one waist size larger for skinny.
Women’s are much worse sizing wise but the difference is that guys jeans generally just look acceptable . When a woman gets jeans that fit her correctly, they can look amazing. I doubt guys ever get compliments on the fit of their jeans.
For women, they could use 6- measurements to standardize it but unfortunately a lot of people fall for vanity sizing and don’t want to accept that they gained weight.
It happens for guys clothing too. If it is a letter based sizing there are huge variations in sizing between clothing companies. For high end brands I wear a large, at Walmart or other box stores, I wear a small.
Yeah, t-shirts absolutely suck. I’m thin, tall, and like to wear my pants lower on my hips, so shirt length is absolutely essential. In most cases, L is an inch or so longer than M, so I get L even though M would fit my chest better. I honestly wish they would just make a size between M and L, like M+, which would be just be a bit longer M (like 2 extra inches).
We really need separate length and width measurements. I’m tall and very skinny. I usually go for a medium, but sometimes even a small, so my shirts are frequently close to too short. If I go larger than I look like I’m swamped in my shirt and it looks horrible.
Exactly. I just live with the fact that shirts look horrible on me. It’s better than people seeing my butt crack when I bend slightly to open a door…
There are “longtail” T shirts that are as your describe, slightly longer.
I have seen a regular and long but only on high end brands. Abercrombie and Fitch is a good example. Their tops have a size and length.
Yeah, I’m not paying $40-50 for a t-shirt. I feel bad enough paying $30 on a t-shirt to support someone’s YouTube channel…
A t-shirt should be $10-20, depending on branding and quality, maybe $30-40 if it uses some super-fancy fabric or something (e.g. merino wool should be $40-ish).
I shop for pants in the Men’s section because the woman’s section doesn’t have big enough sized for my wide ass…
Woah there, men’s pants aren’t size 30, that’s a worthless measurement. We use the inseam too, so they are the right length and the right width. :p
Ie. 32x32
Yup. Unfortunately, it’s also incredibly hard to find anything outside of “normal” ranges. I’m tall and skinny, and finding pants is… a challenge, so I just buy a width size higher and wear a belt. I’m a 33x34, but generally buy 34x34 (used to fit 32x34, but those days are long past). Sometimes I need to go up to 36x34.
Yeah I gave up on jeans and bought a dozen pairs of the exact same pants that fit well, then dyed them.
Sometimes you are different sizes in the same brand. And I don’t mean you might need a small shirt and large pants. No. Sometimes, this pair of pants only fit in large, and this pair of pants only fit in medium. Same brand.
Incorrect. I’m a 32" waste in jeans, yet my waste is much larger than 32".
Uhm, maybe you should got see a gastroenterologist if your shits are larger than 32"
eh?
Ah no, some brands XXL is really just L+.
This is a real example from a somewhat quality brand.
For men, cheap Amazon clothes sizing is increasingly Chinese sizes, so a XXXL is a US large.
so how do we buy clothes online?
I often buy from poshmark, and only listing’s that include measurements of the garments.
Agreed, though I usually just buy brands that I already have items from so I’m familiar with their sizing.
I don’t. I buy most of my clothes at Costco because I’m familiar with their sizing, they’re good quality for the price, and I really don’t care about fashion whatsoever. Also, their fabric is usually kinda stretchy, so I don’t need to be as precise with the fit.
