I doubt I’ll switch any time soon, I use Linux for work and have a dislike for how small issues turn into hours of troubleshooting, but anyway, not the point. I think something that deters a lot of people are the really vocal people who shove it down others throats and treat people who don’t want to switch like idiots.
We all have our reasons, I’ll keep using Win10 until it becomes too much of a security risk and then reevaluate my options. For now I enjoy having shit that just works, for example, I use Cura, it hasn’t had a working Linux release in years, there’s a lot of deterrents for the layperson or those who have to troubleshoot and struggle to get shit working for a job and couldn’t be arsed to do it in their personal time.
Ah, also, some things I see in these comments I don’t really deal with because I use enterprise edition. MS I believe is smart enough to not fuck with their enterprise customers as that’s where their profits are, so I guess my experience is slightly different (I was also an MS SysEng for ~12 years)
Made the switch, yet its still easier for me to remote onto a windows machine to still use autodesk than learn any free alternatives ( freeCAD :l ), and a WiFi driver took me 2 days to find. However my workplace for some unbenownst reason has 11 Pro (instead of enterprise) on some of our machines, which Ill notice popups for office360 and kinda cringe at, hoping the customer never does
Do have to push prusaSlicer, I used Cura for so long but just experimenting found more satisfaction for the slic3r solver, especially for bridges and overhangs
I’ve been walking a friend through starting to print stuff and he uses Arch, so is in turn using Prusa. I find there’s a bunch of settings that are either obfuscated behind one master setting or stuff that’s just plain missing. I’m not going to deny that the slicer itself may be better but I need more options.
Im actually curious what those would be, I’ve been mostly “vanilla” printing, tweaking speed and the likes, only recently tried ironing. And I would hate to be missing out on a cool feature and not even know it lol
This gives some kickass supports. The settings for the z distance needs to be adjusted according to your layer height. Also, this is an old screenshot, I now use tree supports, but all the support interface settings is what actually counts.
Nah, nothing cool or interesting unfortunately, it’s things like extrusion widths (AFAIK there’s just an extrusion multiplier in Prusa)
I mainly use it to get badass supports and rafts that leave the bottom of the print looking good. The trick is, on the top layers of the support material, have the lines less than a mm apart, then under extrude it dramatically, this leaves a really brittle but quite solid layer that doesn’t tend to stick to the print very well but gives good support.
I’ll see if I can find the screenshot I took of all my support settings if you’re interested.
Also people seem to completely ignore the amount of re-learning I’d need to do to switch. I’m not really a power user of Windows, but part of the reason it runs pretty smoothly for me is that I have a decade plus of knowledge of common failure points. You sort of get an intuition about things after awhile that I don’t have on a different OS. Little issues the might result in a couple of days of troubleshooting are just solved immediately because I have hunches on what the issue is.
Meanwhile I’m struggling on my steamdeck to deal with minor problems because I’m very unfamiliar with the setup. It’s not insurmountable, but it’s a barrier to entry that I’m not willing to undertake just yet.
Hallucinations aside, if you use it with skepticism, ChatGPT can be great at walking you through stuff and helping you understand why things work the way they do. I’m using it like a teacher to get better at Python and it’s great.
I personally believe that if work mandates electronic material for your job or project, then they should provide the equipment. However, if this is not possible, then getting equipment that is specialized for your work is a more prudent solution that you can free your daily driver from.
After all, we shouldn’t be married to our work. It should be an investment in our skills and abilities.
This you may hate me for but I use windows on both my work laptop and my personal PC, makes it easier to RDP onto my laptop and use all my screens when I’m at home.
WSL is handy and for everything else I go the cattle route and just spin up an EC2 Instance. That is something I appreciate about Linux, when you write a working script, that shit just works and rarely breaks, so making ephemeral environments is trivial and super handy.
Wait cura is that out of date on Linux? I’ve been using superslicer since cura was kinda confusing to me but I’m surprised it’s lagging behind with the Linux builds
I doubt I’ll switch any time soon, I use Linux for work and have a dislike for how small issues turn into hours of troubleshooting, but anyway, not the point. I think something that deters a lot of people are the really vocal people who shove it down others throats and treat people who don’t want to switch like idiots.
We all have our reasons, I’ll keep using Win10 until it becomes too much of a security risk and then reevaluate my options. For now I enjoy having shit that just works, for example, I use Cura, it hasn’t had a working Linux release in years, there’s a lot of deterrents for the layperson or those who have to troubleshoot and struggle to get shit working for a job and couldn’t be arsed to do it in their personal time.
Ah, also, some things I see in these comments I don’t really deal with because I use enterprise edition. MS I believe is smart enough to not fuck with their enterprise customers as that’s where their profits are, so I guess my experience is slightly different (I was also an MS SysEng for ~12 years)
Made the switch, yet its still easier for me to remote onto a windows machine to still use autodesk than learn any free alternatives ( freeCAD :l ), and a WiFi driver took me 2 days to find. However my workplace for some unbenownst reason has 11 Pro (instead of enterprise) on some of our machines, which Ill notice popups for office360 and kinda cringe at, hoping the customer never does
Do have to push prusaSlicer, I used Cura for so long but just experimenting found more satisfaction for the slic3r solver, especially for bridges and overhangs
I’ve been walking a friend through starting to print stuff and he uses Arch, so is in turn using Prusa. I find there’s a bunch of settings that are either obfuscated behind one master setting or stuff that’s just plain missing. I’m not going to deny that the slicer itself may be better but I need more options.
Im actually curious what those would be, I’ve been mostly “vanilla” printing, tweaking speed and the likes, only recently tried ironing. And I would hate to be missing out on a cool feature and not even know it lol
I almost forgot.
Prusa hides some of these settings…
https://imgur.com/a/jmxr3SV
This gives some kickass supports. The settings for the z distance needs to be adjusted according to your layer height. Also, this is an old screenshot, I now use tree supports, but all the support interface settings is what actually counts.
And that would explain a lot of the behaviors I could’ve probably tweaked with cura… thanks!
Nah, nothing cool or interesting unfortunately, it’s things like extrusion widths (AFAIK there’s just an extrusion multiplier in Prusa)
I mainly use it to get badass supports and rafts that leave the bottom of the print looking good. The trick is, on the top layers of the support material, have the lines less than a mm apart, then under extrude it dramatically, this leaves a really brittle but quite solid layer that doesn’t tend to stick to the print very well but gives good support.
I’ll see if I can find the screenshot I took of all my support settings if you’re interested.
Also people seem to completely ignore the amount of re-learning I’d need to do to switch. I’m not really a power user of Windows, but part of the reason it runs pretty smoothly for me is that I have a decade plus of knowledge of common failure points. You sort of get an intuition about things after awhile that I don’t have on a different OS. Little issues the might result in a couple of days of troubleshooting are just solved immediately because I have hunches on what the issue is.
Meanwhile I’m struggling on my steamdeck to deal with minor problems because I’m very unfamiliar with the setup. It’s not insurmountable, but it’s a barrier to entry that I’m not willing to undertake just yet.
Hallucinations aside, if you use it with skepticism, ChatGPT can be great at walking you through stuff and helping you understand why things work the way they do. I’m using it like a teacher to get better at Python and it’s great.
Does ChatGPT still require giving your phone number to sign up? Because I noped out when it asked me for that shit.
I just use Google one click sign in, no phone number required.
No idea, I signed up when all the OpenAI services were in beta.
All valid.
I personally believe that if work mandates electronic material for your job or project, then they should provide the equipment. However, if this is not possible, then getting equipment that is specialized for your work is a more prudent solution that you can free your daily driver from.
After all, we shouldn’t be married to our work. It should be an investment in our skills and abilities.
This you may hate me for but I use windows on both my work laptop and my personal PC, makes it easier to RDP onto my laptop and use all my screens when I’m at home. WSL is handy and for everything else I go the cattle route and just spin up an EC2 Instance. That is something I appreciate about Linux, when you write a working script, that shit just works and rarely breaks, so making ephemeral environments is trivial and super handy.
Wait cura is that out of date on Linux? I’ve been using superslicer since cura was kinda confusing to me but I’m surprised it’s lagging behind with the Linux builds
I have no idea what they’re talking about. The Windows and Linux versions have been released in step and work perfectly fine on Linux.
I think they may have just released a working Linux version in the last few weeks but I haven’t really looked into it,was just something I heard.