My biggest issue with this is the flight part - it’s a counterintuitive explanation that doesn’t really explain how to make the flight work. It’s not technically wrong, and if you trace that cross-section you will get a working aerofoil. However, you can’t make the Wright Flyer on that explanation, or in fact any of the early aeroplanes that were constructed with simple fabric stretched between wooden frames.
A far more useful and intuitive explanation is that planes fly by flow-turning, basically the interaction between the aerofoil and the air turns the air in one direction, usually down, which pushes the aerofoil in the other direction, usually up. This also means the air below will end up slower than the air on top, which will create a pressure differential. Either of these methods can completely describe how flight works.
Also, a plane isn’t just two aerofoils attached to a central body. Early planes were at least biplanes, and you need horizontal and vertical stabilisers to have full control. You need flaps that give you pitch, yaw and roll, and you need the centre-of-mass - the point where it balances - to be in front of the centre of pressure. That means you need the stabilisers to be at the back to keep the plane stable like a dart.
This isn’t just a “well akshually”, although it sort of is. If you tried to follow the advice as-written and didn’t know this, there’s a good chance you’d end up on the long list of people killed by their own inventions. Actually, I suspect most of these explanations give you plenty of information to kill yourself with but not really enough to actually make any of them work from first principles.
Pretty much everyone in this thread needs to go read Ryan North’s book “How to Invent Everything: A Survival Guide for the Stranded Time Traveler”.
https://www.amazon.com/How-Invent-Everything-Survival-Stranded/dp/0735220158/
Or, if you don’t have time, just print this out and keep it with you at all times:
I don’t know if this helps. It’s enough to know you’re fucked.
“Wrap some copper wire around a core”
Mr. Stegosaurus, please point out the nearest refinery so I can grab some copper wire.
deleted by creator
I find this to be brilliant.
My biggest issue with this is the flight part - it’s a counterintuitive explanation that doesn’t really explain how to make the flight work. It’s not technically wrong, and if you trace that cross-section you will get a working aerofoil. However, you can’t make the Wright Flyer on that explanation, or in fact any of the early aeroplanes that were constructed with simple fabric stretched between wooden frames.
A far more useful and intuitive explanation is that planes fly by flow-turning, basically the interaction between the aerofoil and the air turns the air in one direction, usually down, which pushes the aerofoil in the other direction, usually up. This also means the air below will end up slower than the air on top, which will create a pressure differential. Either of these methods can completely describe how flight works.
Also, a plane isn’t just two aerofoils attached to a central body. Early planes were at least biplanes, and you need horizontal and vertical stabilisers to have full control. You need flaps that give you pitch, yaw and roll, and you need the centre-of-mass - the point where it balances - to be in front of the centre of pressure. That means you need the stabilisers to be at the back to keep the plane stable like a dart.
This isn’t just a “well akshually”, although it sort of is. If you tried to follow the advice as-written and didn’t know this, there’s a good chance you’d end up on the long list of people killed by their own inventions. Actually, I suspect most of these explanations give you plenty of information to kill yourself with but not really enough to actually make any of them work from first principles.
I’ve been meaning to buy this! Does he have a section on how to handle no one speaking your language?